Monday, September 26, 2022

Why Is My Brother Printer Printing Blank Pages

Don't Miss

Probable Causes Of Brother Printer Printing Blank Pages

How to fix Brother Printer printing blank pages?|| Brother DCP-L2540DW/Brother DCP-L2541DW Printer||

Brother Printer blank pages keep printing is generally not a hardware fault but is caused by various other factors that are necessary to accomplish printing jobs. Here are some of the reasons why your printer is printing blank pages:

  • Wrong Paper Size- Your Printer might have set to print a particular size of paper by default. Ensure that you change the default settings of the Brother printer.
  • Clogged Nozzles- Because of the clogged nozzles, the ink in the cartridges might harden up and starts printing blank pages. To rectify this issue you should check the print-head nozzle of the Brother Printer and try to eliminate the blockage. Only then, the printer will run smoothly. You can also report such issues to the experts by dialing the Brother Printer customer support phone number, to get them resolved easily.
  • Empty Cartridges- If there is no ink in the printer then how on Earth would the printer be able to give the desired printout? It is suggested that you have enough ink in the printer cartridge and you should keep a check on ink levels as often as possible.
  • Incorrect Cartridge- Despite the fact that your ink cartridge is full, sometimes you will see that Brother Printer is printing blank pages. The reason behind this could be the misconnection between the printer and the cartridge. To resolve this issue, you should remove and reinstall the cartridge.

You can also try to perform the troubleshooting method given below in order to resolve the issue.

Replace Any Low Or Empty Cartridges

  • Load plain white paper in the input tray.
  • Press the Power button to turn on the printer.
  • Open the cartridge door. Wait until the printer is idle and silent before you continue.Figure : Open the cartridge door
  • Lightly press down on the cartridge to release it, and then pull the cartridge out to remove it from its slot.Figure : Remove the cartridge

    caution:Do not touch the copper-colored contacts or ink nozzles. Also, donot re-tape the cartridges. Doing so can result in clogs, ink failure, and badelectrical connections.

    Figure : Do not touch the contacts or nozzles

  • Remove the new cartridge from its packaging, and then pull the pull tab to remove the plastic tape.

    caution:Do not touch the copper-colored contacts or ink nozzles. Also, donot re-tape the cartridges. Doing so can result in clogs, ink failure, and badelectrical connections.

    Figure : Remove the plastic tape

  • Hold the cartridge by its sides with the nozzles toward the printer, and then insert the cartridge into its color-coded slot until it snaps into place. Make sure that the icon on the cartridge matches the icon on the slot.
  • Insert the tri-color cartridge in the slot on the left.
  • Insert the black cartridge in the slot on the right.
  • Figure : Color-coded cartridge slotsFigure : Example of inserting the tri-color cartridge

  • Push the cartridge forward into its slot until it snaps into place.
  • Repeat these steps to replace the other cartridge, if necessary.
  • Close the cartridge door.
  • Reinstall The Brother Driver

    Sometimes, you may have the brother printer printing blank pages issue because of driver issues. So, take current brother printer driver out from the computer and install the latest latest version of its.

  • Type settings in the windows search, and press the enter button.
  • Click on the apps option.
  • Click on the brother printer and press the uninstall button.
  • Finally, press the uninstall button on the pop up.
  • Which you can easily get from the brothers official website . simply download the setup from there and run it on your computer.

    Read Also: Scanning With Brother Printer

    Canon Printer Prints Blank Pages: Guide To Fix It

    Is your Canon Printer offering blank pages? and you stuck working with a printer? We can understand how irritating it is when trouble starts while we are working. Its very annoying and provoking.

    Some of you will be trying again and again, but let us tell you, there is no use of doing this, after trying repeatedly the printer will print blank pages only. Also, the printer will be out of service.

    So, dont do it again and again. But, Are those important papers? Needed now? Are you worried? Dont be

    Worry is a total waste of time, it doesnt change anything but it steals your happiness and keeps you very busy doing nothing.

    Contents

    Fix Brother Printer Printing Black Pages With White Text

    Why does our Brother printer print blank pages even after ...

    Delete and add the printer driver:

  • To delete the printer driver, click on the Start option.
  • After this, click All apps> Windows System > Control Panel.
  • Further, click View Devices and Printers present under Hardware and Sound.
  • Next, right-click on the printer driver.
  • Then, left-click on the Remove device option.
  • To add the printer driver again:

  • From the Windows System, click Control Panel.
  • In the Hardware and Sound, click View Devices and Printers.
  • Further, click Add a printer and your system will begin searching for an available printer.
  • When the brother printer driver is added successfully, click Next after following some easy prompts.
  • Finally, the problem will be resolved and you will be able to print correctly now. Else, get help from brother printer support.

    FAQ

  • What is reverse printing on a Brother printer?
  • Generally, when you print from brother printer the printing process starts from page 1, page 2, and so and are stacked on top of each page. So if you wish to get the pages stacked in the correct order, then you may opt for Reverse order.

  • Why is my printer printing in negative?
  • This might be happening because in your printer settings Print in greyscale is selected. To disable this function, you need to turn off the print in greyscale option. Also, ensure that the negative option is not selected in the settings.

  • How do I get my Brother printer to print in black and white?
  • Why is my printer printing the background black?
  • Read Also: How To Change Printer Color Settings On Windows 10

    The Printer Driver Is Corrupt

    Your Brother printer may be printing blank pages if the printer driver is corrupt. In this case, you have to uninstall and reinstall the printer driver to solve the problem.

    How to Uninstall and Reinstall Brother Printer Driver

    The steps below will guide you to uninstall and reinstall your Brother Printer driver:

    Windows

    Step 1: Press Windows and R simultaneously. A dialogue box will appear, type in devmgmt.msc and enter. Or navigate to your device manager with the first step in the above solution.

    Step 2: Find Imaging devices, then double click it to expand it.

    Step 3: Locate your printer among the listed options and click it. Then select uninstall device.

    Step 4: Select the Delete driver option when prompted. Disconnect your printer from the power source also restart your computer and router.

    Step 5: Reconnect the printer from all over and see if the problem has been resolved.

    Mac

    Step 1: Open your System and preference and then select Printer and scanner. Click your printer then the to uninstall the printer.

    Step 2: Go to the official Brother website and download the printer driver.

    Step 3: Restart the printer. Next, open the newly installed driver. Click on your printer and then install paper port. Ensure you carefully read the instructions in the drivers manual.

    Step 4: Wait for the driver to be successfully installed and then go to System preference from the Apple menu. Next, select Printers and scanners.

    The Printer Driver Setting Is Incorrect

    To solve the issue, you have to check your printer driver and make sure the setting is correct. Below we have shown you how to do this based on the PC that is connected to the printers Operating System.

    How to Adjust Brother Printer Driver Settings

    Follow these steps to adjust your Brother printer driver setting

    Windows

    Step 1: Click the start button and then select Control Panel and select Devices and Printer.

    Step 2: Select your Brother printer to bring out the printers properties and then click on Printing Preferences.

    Step 3: Select the Advanced option.

    Step 4: Click on PRINT PROCESSOR and then select WINPRINT.

    Step 5: Check Default Data Type and select RAW. Then click OK.

    Step 6: Look for the Keep Printed Documents box and uncheck it.

    Step 7: Finally, click on Apply to save your settings.

    Print out the Print Test Page to see if the problem has been resolved.

    Mac

    Step 1: Open the Apple Menu and then choose System Preferences.

    Step 2: Check for Printers and Scanners under Hardware and then select it.

    Step 3: Highlight any Brother printer driver and then click on the sign at the left bottom of the screen.

    Step 4: Click on Delete Printer.

    Step 5: Click on the sign and then click on the Default Icon on the top of the screen.

    Step 6: Choose your printer from the list of available printers.

    Step 7: Select CUPS Driver from the Print Using or Use list.

    Print a document to see if the printer is now printing correctly.

    Don’t Miss: Uninstall Printer

    Brother Printer Unable To Print 32

    Is your Brother printer unable to print 32? You can solve the error instantly with the procedure given below. Take a look at the following 9 steps.

    1. Power off the Brother printer and tap the front cover release button.

    2. Lift up the drum unit through its green handle.

    3. Now, you will see a gray lock lever on the left. Release it to pull the drum units front and then pull the unit using the green handles.

    4. Inspect the inside of your printer for possible bits of paper or labels and remove them gently.

    5. Next, remove the toner cartridge. Now you will find 4 open slots on the drum unit. Look for scraps or labels near the openings and around the black roller and remove if found. Also, turn over the drum unit to inspect for paper or labels.

    6. Where the drum unit was placed in the Brother printer, you will find the transfer belt. Remove it via the green parts by lifting it. Remove any unlikely material on the belt.

    7. Where the belt was installed, you will find a waste toner box. Pull it out by holding its green handle and then peep inside the machine for scraps.

    8. Place back all the parts to reassemble your Brother printer correctly and then push down the gray lock lever.

    9. Close the front door and then power on the device. The error will no longer prompt.

    Solution 7

    Uninstall And Install The Printer Driver

    How to Fix Blank Pages – Access POWER PURGE and fix printing issues on a Brother MFC DCP printer
    • Start your Windows PC and click on the Start button and expand the All Programs.
    • Open the Control Panel window and double-click on the Printers and Scanners.
    • Find the Brother printer driver and click right on it to expand options.
    • Choose the Uninstall option.
    • After a while, you will see that the Brother printer driver will be uninstalled.
    • Now, launch a web browser and head to the Brother printers official page.
    • Follow the on-screen instructions to install the newly downloaded Brother printer driver.
    • Once it is ready for use, restart your computer and your Brother printer as well.

    After uninstalling and reinstalling the printer driver, you will get past the why is my brother printer printing blank pages traumaforever.

    Fix 5:

    You May Like: Printer Head Alignment Canon Ts3122

    My Brother Printer Is Producing Only Blank Pages

    My printer is around 6-7 years old, but it’s very lightly used. I bought it in university several years ago. The last 3 years it hasn’t been used at all. Recently, I re-enrolled in courses and decided to fire it up again but my ink was gone. So I just dropped $70 on ink only to find out that my printer’s messed up because it’s only “printing” blank pages. According to the brother support site, I needed to use the copier to see if it was a connection problem or a hardware problem. Welp… it produced a blank page when I tried to copy it so it’s a hardware problem. Issue is, their “fix” was to use the cleaning button several times . I LOST HALF MY INK IN 10 MINS. 4 Cartridges all half done… and all I have to show for it is blank pages.

    Their live support is closed until tomorrow and I’m just having such a bad day. Overall, I lost my job cause of covid so dropping that $70 only to have it wasted in a matter of minutes is just the cherry on top. If anyone can teach me how to fix this/what to do, I’d be greatly appreciative! I can’t really afford a new printer so I’m desperate for a solution.

    Why Does Brother Printer Print Extra Blank Pages

    When you print something and receive an extra blank page from the brother wifi printer, please change the printer feed mode settings. Pick up the end of page retract from feed section.

    Now save these settings. Suppose it doesnt solve the problem. Please go to why does my brother prints a blank page after each job? for more details.

    Read Also: How To Setup Wireless Printer On Mac

    Check Out Some Information About Canon Printers:

    Canon is the most reliable printer. Its A good quality printer to say. If you are finding the best printer for printing then Canon Printer will be the best choice. It has many color contrasts too.

    Do you know why the Canon Printer prints blank pages? If not, its okay below-written points will help to find the reason. After finding the reason we will tell you how to fix it. Have a look!

    Nozzle Cleaning On Printers Without Touchscreens

    Why is My Brother Printer Printing Blank Pages (844
    • Press the Ink key or the Menu key on your Printer.
    • Select the Cleaning option, and press OK.
    • Select single or all four nozzles for cleaning.
    • The rest steps are the same as mentioned in the previous method.

    Disclaimer: Printer Offline Tech, is a third-party service provider and have no affiliation or relation with the brand or service. Any image or content used in the post is only for representation and information purposes and we do not have any right or authority over it. How are you using this information is solely your responsibility and we shall not be held accountable for the same.

    You May Like: Why Is My Hp Printer Printing Blank Pages

    My Printer Prints Blank Pages What Should I Do

    Today, youll find a printer or two in almost every school, household, and office. From printing memorable photos to everyday documents and reports, it has become an essential tool in the modern world. Nevertheless, the handy printer has its fair share of flaws that can sometimes leave users in disarray.

    One of the most frustrating things you may experience with a printer is when it suddenly prints blank pages. And if youre working on a crucial document or file, this problem can be quite maddening. Fortunately, there are ways to fix this issue so you can immediately get back to where you left off. They are also easy enough to do on your own even with little or no technical Know-how.

    Solution : Check The Ink Cartridges

    First, you should check the ink cartridges. You had better check the ink levels on your printer since the HP printer prints blank pages issue can be caused by the low or empty cartridges. Its also recommended to remove and reinstall your cartridges. After that, if the issue still occurs, you can try the solutions below.

    Read Also: How To Turn Hp Printer Online

    How To Fix Brother Printer Printing Blank Pages

    Is your brother printer printing blank pages recently and you dont know how to deal with such an annoying situation? Well, this is not a single problem faced by users but there are many problems that become the cause of their frustration.

    However, if you are also facing the issue with your brothers printer, then worry not because this article has got you covered by showing you the best alternatives for getting your printer on the right track.

    But before taking our discussion further to fix the issue, let us try to know why your brother printer is printing blank pages.

    Why Is My Printer Sending Out Blank Pages

    Why is my printer printing blank pages? How to fix blank page Epson why nothing printed on my paper

    Several factors may cause the product to print blank pages, such as print settings, low ink, or the product itself. Print a nozzle check pattern to see if any of the nozzles are clogged. Clean the print head, if necessary. Make sure the paper size, orientation, and layout settings in your printer software are correct.

    Recommended Reading: Where Is The 8 Digit Pin On My Hp Printer

    Solution : Configuring The Print Spooler Service

    Another reason why printers generate blank pages is because of damaged Print Spooler files. In this case, you need to configure the service associated with Printer Spooler to get rid of the problem. To proceed, follow the instructions below:

  • On your keyboard, press Windows Key+R. Doing so will open the Run dialog box.
  • Inside the Run dialog box, type services.msc , then click OK.
  • Once the Services window is up, scroll down until you find the Print Spooler service.
  • Double-click it, then click Stop on the new window.
  • Now, open File Explorer by pressing Windows Key+E on your keyboard.
  • Navigate to this folder location:
  • C:\Windows\System32\spool\PRINTERS

  • Remove all the contents of the folder.
  • Open the Services window again, then double-click Print Spooler.
  • On the new window, click Start.
  • Do not forget to set the Startup Type to Automatic.
  • After configuring the Print Spooler service, try printing several pages again to see if the problem has been resolved.

    What do you think about this article?

    Let us know how we can improve this blog post by commenting below!

    Why Is Brother Printer Printing Blank Pages From Iphone

    If you have connected your Brother printer to your iPhone and you are facing issues with it, then there is possibly an issue with the AirPrint software available on it. To ensure that you do not face any issues while giving print commands from your iPhone, you should probably check if everything is fine with the network connection on your device. In addition to this, you are suggested to re-configure the AirPrint settings on your device and try to take a test print.

    Recommended Reading: How Do I Find My Printer Queue

    More articles

    Popular Articles