How To Setup Wireless Brother Printer

Does Your Brother Machine’s Screen Display Any Errors

How to Set Up Wireless for the Brother MFC-7860DW Printer

If the machine’s screen displays printing errors, such as “Paper Jam” or “Ink/Toner Empty“, the machine may not allow you to print. Clear the errors first, and then try to print. For more information about error messages, see the Online User’s Guide or Basic User’s Guide or User’s Guide.

If your machine displays no errors, but you cannot print, go to the next section.

A copy of your Brother machine with the same name may have been created if you:

Changed the USB port on the computer connected to the Brother machine.
Installed the same printer driver multiple times.

When printing, always select a working printer driver . We also recommend deleting unnecessary printer icons.

If you are not sure which printer icon to select, check which printer driver is working:

Turn your Brother machine on. If any other machines are connected, turn those machines off.

Open the “Devices and Printers” folder:

Click Hardware and Sound> Devices and Printers.

StartDevices and Printers

Hover the cursor over the printer icon until the printer status pop-up appears.

If the status is paper size or Ready, the printer driver is working correctly. Select this printer when printing.

If not, check your wireless connection, go to Section 7.

To change the printer name in Windows 7 or later, do the following:

Right-click the printer icon.

Click Printer Properties.

Change the printer name in the Printer Properties window, and then click OK.

The Process Of Connecting Your Brother Printer To Your Wireless Network

To set up a printer on a network, please follow the steps below:

Your printers menu key is located on the left side of the keyboard.
To find a wireless network, use the Network Wizard.
Enter your password of wireless network.
As soon as its connected, you can use a wireless printer to print.
Visit Brother Printer Wont Connect To Wireless Network for comprehensive Help and Steps.

In your computers CD-ROM drive, insert the CD-ROM that came with it. If there is a
Choose your computer from the model name screen that appears. If there is a
A language selection screen appears, allowing you to select your preferred language.
Install MFL-Pro Suite by clicking Initial Installation.WiFi connection for Brother Printer
If you agree with the license agreements, click yes.
Next, select Wireless Network Connection from the drop-down menu.
As soon as you see the Firewall/Antivirus Detection screen
Activate Firewall port settings
Continue the installation by connecting to the network and completing it.
and click the Next button to continue the process.
As soon as you see this screen, follow the on-screen directions.
Select the machine from the list, and then click the Next button to move forward.
To complete setup, follow the on-screen instructions provided by the software.

Connect using WPS Pin Brother Printer

How to connect the printer on your WiFi to get the right of entry to point/router for windows?

How To Connect Brother Mfc L2700dw Printer To Wifi

In this method, we will teach you how to connect Brother printer MFC L2700DW to wifi from the devices Control Panel. The step-by-step instructions of this method have been shown below. Take a quick look at these.

1. Turn on your Brother MFC L2700DW Printer.

2. From the Control Panel, go to the Menu.

3. With the help of the Up or Down arrow key, select the Network option.

4. For selecting a Network, press Ok.

5. The next step is to access the WIreless LAN choice. Then tap Ok.

6. Now, activate WLAN by visiting the Assistant setup.

7. Choose the Setup Wizard with the help of the Up or Down arrow key.

8. You will be asked whether you want to enable WLAN. Press Yes to confirm.

9. The last step is to fill in the details of your wifi network and your Brother MFC L2700DW will be connected to the wifi.

Method 4: How to Connect the Brother Printer to the Wifi via Printer Driver?

Do you know you can also use the Brother printer driver for connecting your printer to the wireless network? The detailed steps to use the printer driver for this purpose have been outlined below. So, let us read these to know how to connect wifi with Brother printer.

1. Start your computer or laptop with the administrator credentials.

2. Turn off all the background programs that may be running.

3. Also, turn off your antivirus software as it can interfere with this process.

4. Use the CD received with your Brother printer to prepare the setup for the printer driver.

Don’t Miss: Why Is My Printer Offline Hp Envy

Connect Brother Printer On Windows Computer With Usb:

If you want to connect Brother printer to Windows computer with wired connection, follow the below steps-

First, connect your Brother printer with your Windows computer through the USB which came along with your printer.
Then, download driver from Brothers website and finish the installation setup process as explained in the above section
Lastly, add your printer from control panel and your Brother printer will be connected to your computer.

How To Connect Wifi Direct On Brother Printer

Use a computer or laptop and Brother printer connect to Wi-Fi or wireless network to setup brother printer. After the reset, you need to install the software. You can use the included disc, but its best to download the latest version from the manufacturers website.

Go to the manufacturers website using the link, enter the model name in the search bar.
The operating system version is detected automatically.
In case, software is required for 32 0r 64-bit Windows 7 or Windows 10.

Select the required software package in the section Driver-Installation kit of the device software.

Run the installer file and wait for the program to unpack the package and extract the files.
In the window for selecting the device to be used, find the required series of printers and click Wireless installation.
In the next window, click the Install Printer Software link at the top, not the Start Installation item .

Window for selecting the type of installation, put the radio button Advanced installation and click the button Next.

You May Like: Hp Envy 4520 Print From Phone

Have You Tried To Check And Repair Your Wireless Connection

Make sure your Brother machine is correctly connected to the wireless network.

Place your machine as close to the wireless router or access point as possible with minimal obstructions. Large objects and walls between the two devices and interference from other electronic devices can affect the data transfer speed of your documents and cause connection issues.

Visit an Internet site or send and receive emails. If you can access the Internet, but your Brother machine cannot be found over the wireless network, go to step 4.

Print the WLAN report, which will show you the status of your wireless connection.> Click here to check the wireless status on the WLAN report.

Turn all the following devices off and then on again in the order shown in the illustration: Wait at least five minutes for your Brother machine to join the wireless network, and then try to print. If you still cannot print, go to next step.

Try the Network Connection Repair Tool. This tool assists you in restoring wireless printing capability with minimal user interaction by automatically locating and updating your Brother machine’s IP address within your printer driver.

Download the Network Connection Repair Tool.

Run the Network Connection Repair Tool.

Try to print. If you still cannot print, perform additional wireless connection checks in the next section.

If you still cannot print, try to set up your Brother machine again. Go to the next section.

Uninstall the Brother driver.

Wifi Connection For Brother Printer

Brother Wireless Printer Installation

To get started, you will need to download the Brother Printer Driver and Software. To WiFi connection for Brother Printer
Do you have any installation discs on your computer or laptop? Enter the CD into your computers CD drive, if you have one.WiFi connection for Brother Printer
Visit Brothers website to get the latest printer driver.
Now, youll need to download your printers driver. In the next step, please select Wireless Network Connection.
And then click next.
Please connect your printer to the power source so that we can enable wireless connectivity in our printer.
To access the network settings, press the menu key.
Select your printer name and enter your password after enabling the WLAN.
As soon as your printer detects the wireless network, it will connect to it.

Recommended Reading: Can I Connect My Phone To My Printer

Set Up The Wireless Connection Manually With The Printer Driver Installed

To connect your printer to a wireless network, you must use the supplied AC adapter or Li-ion battery. If your Brother printer is powered by alkaline or Ni-MH batteries, you cannot connect it to a wireless network.

Make sure that the printer driver, Printer Setting Tool, and P-touch Editor are installed on your computer.

Turn on the printer.

Make sure the printers Wi-Fi LED is flashing.If the Wi-Fi LED is not flashing Press and hold the Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button.

Connect the printer to the computer with a USB cable.

Start the Printer Setting Tool on the computer, and click . For more information about the Printer Setting Tool, see “Using the Printer Setting Tool “.

In in the tab, do the following:

Make sure that is selected for .

Enter the SSID that you used previously, or click and select the SSID from the list.

Enter the password as and click .

Enter the correct and settings for your wireless network.

When the printer and the wireless router/access point are connected successfully, the printers Wi-Fi LED stops flashing, and then becomes lit.

Make sure that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the list.

You can now edit and print labels wirelessly from your computer.

Printing From An Android

How to Set Up a Brother HL-2270DW Printer – wireless

1Connect your printer to the wireless network. Use the steps above to make sure your printer is connected to the wireless network. Follow the instructions in the user’s manual that came with your printer if you need help.

Make sure your wireless printer and your Android phone are connected to the same wireless network.

2Open the Settings app

Read Also: Hp 61 Cartridge Reset

Connect Brother Printer To Wifi Without Password

This process is also known as Connect brother printer to wifi through WIFI DIRECT

WPS doesnât Require Security Key/ Password.

There is a WPS button on every Router to turn on the WPS.

Suppose you have a wireless router/access point supporting the WPS or AOSS . In that case, you can easily connect your wireless network/access point with your brother printer just follow the given step without skipping any step for Brother printer wifi setup:

CONFIGURE THE WIRELESS SETTING

Bring the Wi-Fi router and your Brother Printer as near as possible for wifi Setup.
Ensure that the power cord is plugged in.
Then, turn the printer ON and wait until the printer is in the READY state.
After that, a few seconds hold down the WPS button on your wireless network/access point.
As shown in the given photo, for less than 2 seconds, click the wireless setup located on the back of the router.

NOTE: To click the wireless setup button, use a ballpoint pen or a sharp point object. Do not press the button for more than 2 seconds.

If the READY LED is not blinking, the printer fails to connect with the wireless router/access point.

Use The Flat Scanner Glass

Place your fax document on the flat scanner glass face-down.

If Fax Preview is turned off, select Fax. If Fax Preview is turned on, press Fax, then Sending Faxes.

Manually enter your recipients fax number, or select a recipient from your address book.

Choose Fax Start.

The machine will ask you if you want to send a color fax. Choose Yes or No to move on.

The screen will ask you if you have any more pages. Select No to send a single page. If you select Yes, move on to the next step.

Place Your next fax document face-down on the scanner.

Select OK.

Repeat steps 6 – 8 until you have scanned every page that you want to fax.

After all pages have been scanned, choose No when asked if you have any more pages.

After selecting No, your Brother printer will send your fax.

Recommended Reading: Connect A Wireless Printer To A Mac

Wireless Setup Printer Instructions

I am here to give you some tips on how to set up your wireless printer. These are the steps that I took in order to get my wireless printer connected and ready for use.

The first step is to look at what type of connection you have, either USB or Ethernet? This will determine whether or not the printer needs a physical wire plugged into it.

If you need a wire, plug one end of an ethernet cable into your router and then connect the other end into the back of the printer.

If there’s no need for cables, just turn on your computer and wait until it fully boots up before connecting to WiFi . Step two is deciding where exactly this device will be located inside.

Connect Brother Printer To Wireless

Brother L2541DW Monochrome Laser Printer setup

Dear Friends, Its Very Easy to Connect Your Brother Printer To Your Wireless

Please Follow Steps to setup Printer with Network

Press The Menu Key at Your Printer.
Go to The Network Wizard Look For Wireless Network.
Select Your Wireless Network and Type Your Password
Now Once it Connect, You Can Use a Printer to Print with a wireless router.

Recommended Reading: Making A Printer Online

Why Is My Brother Printer Not Connecting To Wifi

The printer is not connecting to the Wi-Fi. It’s not that hard to fix if you know what you’re doing. Here are some tips on how to help your Brother printer connect to your home Wi-Fi network.

Search for wireless networks in the area

Select the one with a password

Type in the password and press enter

Wait 5 seconds

Press yes when asked if it should connect automatically

If it doesn’t, select no

Press Yes when asked if you want to use this connection

You will then be connected.

Way : Install Brother Printer Via Usb Cable

Alternatively, you can use a USB cable to install Brother printer on Windows 10.

Firstly, you should prepare a compatible USB cable. Check the ports of your Brother printer and your computer to see which type of cable can connect the two devices. Generally, there are three types of printer cables:

The USB AB cable
The parallel cable
The Ethernet cable.

Then, you can attach a compatible cable to your Brother printer and your router. After that, your computer will detect the connected printer and install the corresponding driver for it automatically. If it does not, you can repeat the steps about how to add a Brother printer to Windows 10 PC.

Also Check: How To Print From My Samsung Tablet

Setup Brother Printer Via Wifi Steps To Connect Brother Printer To Wifi

Guide to connect brother printer to wifi. Follow the steps as given below:

Turn your Brother printer switch ON. Therefore, connect the power cord with your printer and then compare it with the electric socket.
In the control panels press the Menu button. Then, to select the NETWORK press the UP or DOWN key and press OK.
Next, select the WLAN press on the UP or DOWN arrow key and then press on OK.

Thus, to select the SETUP WIZARD, click the UP or DOWN arrow key and then press on OK.
When on display a WLAN ENABLE? Shows then select on YES to enable it. It will start the WIZARD.
A list of Network Names will show on your LCD then the printer will search for your network. When the SSID list comes, press on the UP or arrow keys to choose the subnetwork which you wrote down earlier, then press OK on it.

Do any ONE of the following:

If not, you are handling encryption on the authentication method that requires the PASSWORD. Then, get in the network key, to apply to your setting press OK. Then select YES to embed the settings.
Otherwise, if your authentication method is OPEN SYSTEM and encryption method is none. Then, proceed to the next step.

The wireless network which you are selected is trying to connect with your machine.
If the connection failed, then the printer will print the report of the wireless connection. Hence, check the error code on the printed statement.
Suppose the printer is successfully connected. Then, the LCD of the machine display CONNECTED.

How Do I Connect The Printer To My Computer Via Wi

Connect Brother printer to wifi – wireless tutorial

To connect the printer and your computer:

Connect your computer to your wireless router/access point.

Connect your Brother printer to the same wireless router/access point.

Connect your Brother printer and your computer.

Depending on whether the printer driver is installed, do one of the following:

The printer driver is not installed

Follow the on-screen instructions to complete the software installation. When the installation is complete, click to close the installer window.

When the printer is connected to your wireless router/access point, the printers Wi-Fi LED becomes lit.

Make sure that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the list.

You can now edit and print labels wirelessly from your computer.

Read Also: Get Printer Online Hp

How To Setup Wireless Brother Printer

Don't Miss

Does Your Brother Machine’s Screen Display Any Errors

The Process Of Connecting Your Brother Printer To Your Wireless Network

How to connect the printer on your WiFi to get the right of entry to point/router for windows?

How To Connect Brother Mfc L2700dw Printer To Wifi

Method 4: How to Connect the Brother Printer to the Wifi via Printer Driver?

Connect Brother Printer On Windows Computer With Usb:

How To Connect Wifi Direct On Brother Printer

Have You Tried To Check And Repair Your Wireless Connection

Wifi Connection For Brother Printer

Set Up The Wireless Connection Manually With The Printer Driver Installed

Printing From An Android

Connect Brother Printer To Wifi Without Password

This process is also known as Connect brother printer to wifi through WIFI DIRECT

WPS doesnât Require Security Key/ Password.

There is a WPS button on every Router to turn on the WPS.

Suppose you have a wireless router/access point supporting the WPS or AOSS . In that case, you can easily connect your wireless network/access point with your brother printer just follow the given step without skipping any step for Brother printer wifi setup:

CONFIGURE THE WIRELESS SETTING

Bring the Wi-Fi router and your Brother Printer as near as possible for wifi Setup.

Ensure that the power cord is plugged in.

Then, turn the printer ON and wait until the printer is in the READY state.

After that, a few seconds hold down the WPS button on your wireless network/access point.

As shown in the given photo, for less than 2 seconds, click the wireless setup located on the back of the router.

NOTE: To click the wireless setup button, use a ballpoint pen or a sharp point object. Do not press the button for more than 2 seconds.

If the READY LED is not blinking, the printer fails to connect with the wireless router/access point.

Use The Flat Scanner Glass

Wireless Setup Printer Instructions

Connect Brother Printer To Wireless

Why Is My Brother Printer Not Connecting To Wifi

Way : Install Brother Printer Via Usb Cable

Setup Brother Printer Via Wifi Steps To Connect Brother Printer To Wifi

Guide to connect brother printer to wifi. Follow the steps as given below:

Turn your Brother printer switch ON. Therefore, connect the power cord with your printer and then compare it with the electric socket.

In the control panels press the Menu button. Then, to select the NETWORK press the UP or DOWN key and press OK.

Next, select the WLAN press on the UP or DOWN arrow key and then press on OK.

Thus, to select the SETUP WIZARD, click the UP or DOWN arrow key and then press on OK.

When on display a WLAN ENABLE? Shows then select on YES to enable it. It will start the WIZARD.

A list of Network Names will show on your LCD then the printer will search for your network. When the SSID list comes, press on the UP or arrow keys to choose the subnetwork which you wrote down earlier, then press OK on it.

Do any ONE of the following:

If not, you are handling encryption on the authentication method that requires the PASSWORD. Then, get in the network key, to apply to your setting press OK. Then select YES to embed the settings.

Otherwise, if your authentication method is OPEN SYSTEM and encryption method is none. Then, proceed to the next step.

The wireless network which you are selected is trying to connect with your machine.

If the connection failed, then the printer will print the report of the wireless connection. Hence, check the error code on the printed statement.

Suppose the printer is successfully connected. Then, the LCD of the machine display CONNECTED.

How Do I Connect The Printer To My Computer Via Wi

More articles

Popular Articles

About Us

Popular Category

Editor Picks