How To Setup Wifi On Brother Printer

Set Up The Wireless Connection Manually With The Printer Driver Installed

How to Set Up Wireless for the Brother MFC-7860DW Printer

To connect your printer to a wireless network, you must use the supplied AC adapter or Li-ion battery. If your Brother printer is powered by alkaline or Ni-MH batteries, you cannot connect it to a wireless network.

Make sure that the printer driver, Printer Setting Tool, and P-touch Editor are installed on your computer.

Turn on the printer.

Make sure the printers Wi-Fi LED is flashing.If the Wi-Fi LED is not flashing Press and hold the Wireless Mode button for one second to turn on the wireless mode. When the Wi-Fi LED is lit, release the Wireless Mode button.

Connect the printer to the computer with a USB cable.

Start the Printer Setting Tool on the computer, and click . For more information about the Printer Setting Tool, see “Using the Printer Setting Tool “.

In in the tab, do the following:

Make sure that is selected for .

Enter the SSID that you used previously, or click and select the SSID from the list.

Enter the password as and click .

Enter the correct and settings for your wireless network.

When the printer and the wireless router/access point are connected successfully, the printers Wi-Fi LED stops flashing, and then becomes lit.

Make sure that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the list.

You can now edit and print labels wirelessly from your computer.

Unboxing And Initial Configuration Of The Printer :

Assemble and insert the roll of badges into the printer. These are a sample roll of the Brother DK-2251 labels .

Plug the black power cord into the printer and a power socket.

Press the power button to turn on the printer. Make sure the green status light comes on.

Use the , and buttons to set your language, the time and date as prompted.

Press the button and use the and buttons to select Template Settings, set Template Mode to OFF.

Press the button and use the and buttons to select Settings. Select Auto Power Off > Adapter to OFF.

Use The Wlan In Order To Connect The Brother Printer To Wi

Well, you might be thinking whether how you will be able to Connect Brother Printer to Wi-Fi. Well, it is not going to take much effort. All you are required to do is to perform simple steps in order to fulfill the task.

Make sure that you are examining the base or the side of the access point or the wireless router.
After that go through the document thoroughly. You are likely to find the best information that is linked to the network name and the password key on the back of the access point and the wireless router.
The next thing that you need to do is to set up the brother printer. For this, you need to locate the power cord and then connect it with the brother printer machine. The next thing that you need to do is to connect it with the electronic socket in order to power it on.
Press the menu button on the control panel of the machine.
The next thing which you need to do is to choose the network using up and the down keys again.
Then press the navigation keys in order to choose the WLAN and then press the OK button.

This is going to help you connect the brother printer with the Wi-Fi.

How Do I Connect The Printer To My Computer Via Wi

To connect the printer and your computer:

Connect your computer to your wireless router/access point.

Connect your Brother printer to the same wireless router/access point.

Connect your Brother printer and your computer.

Depending on whether the printer driver is installed, do one of the following:

The printer driver is not installed

Follow the on-screen instructions to complete the software installation. When the installation is complete, click to close the installer window.

When the printer is connected to your wireless router/access point, the printers Wi-Fi LED becomes lit.

Make sure that the Editor Lite LED is off. Start the P-touch Editor and select the printer from the list.

You can now edit and print labels wirelessly from your computer.

Why Is My Brother Printer Not Connecting To Wifi

Primary Guide to Solve Brother Printer WiFi Connection Problem. First of all power off the Brother printer and router for minimum one minute and then power on it back. Then turn off the Wi-Fi on your Brother printer and then again turn it on. Try to connect your Brother printer to the Wifi using WPS method.

How To Connect Your Brother Mfc 9340cdw To Wifi:

1. Press WiFi icon.

This icon should appear on the upper right hand corner of your touch screen. If you have this icon, press it and move to step 6.

If you dont have this button, skip this step and move on to step 2.

2. Press Settings icon.

This is the tool icon on the upper right hand corner of your touch screen.

3. Click All Settings.

7. Press Yes when Enable WLAN? is displayed on the touch screen.

8. Choose Network Name .

Your machine will display a list of available network names in your area. If your network name is not displaying, check your wireless router/ access point to see if it is turned on and connected. If so, you may need to move your machine closer to the wireless router/ access point.

9. You now have the following options:

a. Enter Network Key. Enter the Network Key of your wireless router/access point using the touch screen. Once you have entered your Network Key, press OK and then press Yes to apply the settings. Move to step 10.

b. No Network Key needed. If your Network Name is not encrypted with a password, you may skip this step and go to step 10.

c. WPS route. If your wireless router/ access point supports the WPS, press Yes when the machine asks if you would like to WPS. When the machine instructs you to begin WPS, press the WPS button on your wireless router/ access point. Then press Next using the touch screen.

10. Connect to WiFi.

Connecting The Brother Printer To A Wireless Network

This article will guide you through the steps to connect your Brother Printer to your wireless network.

First and foremost: Your corporate network needs its firewall configured correctly for Sine. Contact your network administrator to make sure this is set correctly. This step is vital for the functionality of Sine and Brother Printer function!

Secondly: If you have and are using a cellular-based iPad with Hot-Spot functionality, follow these instructions instead.

You May Like: Restart Spooler Windows 10

How To Install Brother Printer Wireless

To set up your Brother machine on a wireless network:

Connect the power cord to your Brother machine and then connect it to an electrical socket.

Press Menu button on the machines control panel.

Press the Up or Down arrow key to select Network and press OK.

Press the Up or Down arrow key to select WLAN and press OK.

Connecting To Wireless Network:

Connect Brother printer to wifi – wireless tutorial

Press the button and use the and buttons to select WLAN, then turn WLAN to On and press .

Use the and buttons to select Infra Manual Setting in the WLAN settings menu and press .

Your printer will search for available Wi-Fi networks.

Use the and buttons to select the same network that the iPad is using. Press OK and type in the network password .

You will receive a Connected! message. If it does not connect, repeat the above steps to try again or attempt connection to a new network until you receive the “Connected!” confirmation.

Press the button to return to the main screen. You should see the Wi-Fi icon in the top right.

Connecting Your Brother Mfc

Like any other wireless printing capable printer, the Brother MFC-L2700DW lets you print via WiFi. For anyone not familiar with this model this printer is a monochrome, all-in-one laser unit with duplex printing capability. It can print and copy as fast as 27 pages per minute as claimed by Brother. It has duplex printing feature that is useful for printing black and white handouts such as flyers, drafts and other documents that could be printed back to back to save on paper. It also haswireless printing capability which means that you can print from your mobile devices anywhere at home or office.

To enable wireless printing from your PC or mobile devices follow these steps to connect your Brother MFC-L2700DW to a wireless network.

The SSID is the network name of your WiFi. Take note of the name as you will need to input this information in the later steps.
If the WiFi connection is password protected, you can obtain the password from the owner of the router. If the password was never changed, default passwords are usually located at the back, opposite, or side of the router itself.

After fulfilling the prerequisite steps above, heres what youll do next:

Press the MENU button.

Scroll the arrow key and select then press OK. Go to NETWORK > WLAN > SETUP WIZARD > WLAN ENABLE? Set to YES > Network Name > PASSWORD

Open the printer driver installation file youve downloaded earlier or from your bundled Brother Driver CD.

How Do I Connect My Iphone To My Brother Printer

Printing a document via Air-Print, on iOS, is extremely simple: first, open the file you want to print on paper, click on the action and tap the panel you want to print. Therefore, add brother printer to mac also if needed. In some applications, such as Word for iOS, you need to connect the function menu button), tap the print item inside, and then the Air-Print icon. However, tap the printer connected to the proposed panel, wait a few moments for the Brother device to be detected, and select it by tapping its name To finish, set the number of copies and print options using the items on the screen, and tap the print item in the upper right to start the process immediately. Very easy, dont you think?

Also Check: How To Find Wps Pin On Printer

Connecting Via Nearby Printer List

Press the Cog button in the bottom-right corner of the iPad and enter your password that you use to log into the the web dashboard.

2. Touch Printing from the side-bar

3. If the Brother Printer is connected to the same wireless network as the iPad, it will display in the Nearby Printers list.

4. Touch your desired printer to connect to it.

5. Once connected, touch the Done button to return to main screen of the SinePoint Pro app.

Some Queries Related To The Brother Printer Wireless Setup Issue:

Brother LASER Printer Install Setup and Wifi HL

How to turn on the WIFI on the brother printer?

Press the menu key.

Press the WLAN enable, and click on ok.

How do I make my brother printer discoverable?

To make the printer discoverable in the computer or network. You must have to attach the printer to the pc through USB or wireless connection. If you are using the USB or local printer and want it to be discoverable in the network. Then you have to share it in the network from the printer properties.

My brother printer is connected to the WIFI but not showing up in the computer why?

Generally, PCs are unable to find the printer due to the following reasons:

The printer is in the deep sleep mode or states.

Devices are not available in the same network.

So you should check these settings, if both settings are correct but still having trouble with the printer wont connect to wifi or computer issue? Go to the router settings and update the settings.

Check the firewalls inbound/ outbound rules.

Disable the antivirus, proxies and VPN for 15 minutes.

Enable the DMZ settings on the router.

For more details, you can visit: why is my brother printer not connecting to computer?

What to do if the brother printer isnt connecting to the iPhone?

Turn off the mobile data on the iphone. Now connect it to the same wireless network through which your printer is connected. If that doesnt help in accessing the printer from iphone. You should reboot the phone and printer. Also, you should check the brother wifi direct password?

Also Check: Collate In Printer

Use Printer Drivers To Connect Brother Printer To Wifi

You can easily Connect Brother Printer Wireless via installing drivers and Softwares. For that, simply follow the instructions below:

First, Access your system with administrator credentials. Abort all the programs running in the system background before you initiate the driver installation.
Disable your antivirus till your software setup is in progress and you can enable it after installation.

You must have got a CD with your Brother Printer instruction documents.

Use the CD and initiate the setup procedure.

When your system initiates the setup process, it will ask you to choose the nearby Brother Printer that you want to connect with the network. It also gives you the choice to choose your preferred language.

A window will appear on your screen with the various installation processes.
We recommend Pro-suite as it provides a full Drive & software package. It includes both wireless and wired network options for you.
After selecting the suite, click on the Next button.

Now, choose the wireless network to which you want to connect your Brother Printer and Select Next.
If any antivirus window appears on your system screen, It will provide two options:

You can alter the antivirus port and initiate network connection to continue the installation of setup.

You can continue without altering the port

How To Connect Brother Mfc L2700dw Printer To Wifi

In this method, we will teach you how to connect Brother printer MFC L2700DW to wifi from the devices Control Panel. The step-by-step instructions of this method have been shown below. Take a quick look at these.

1. Turn on your Brother MFC L2700DW Printer.

2. From the Control Panel, go to the Menu.

3. With the help of the Up or Down arrow key, select the Network option.

4. For selecting a Network, press Ok.

5. The next step is to access the WIreless LAN choice. Then tap Ok.

6. Now, activate WLAN by visiting the Assistant setup.

7. Choose the Setup Wizard with the help of the Up or Down arrow key.

8. You will be asked whether you want to enable WLAN. Press Yes to confirm.

9. The last step is to fill in the details of your wifi network and your Brother MFC L2700DW will be connected to the wifi.

Method 4: How to Connect the Brother Printer to the Wifi via Printer Driver?

Do you know you can also use the Brother printer driver for connecting your printer to the wireless network? The detailed steps to use the printer driver for this purpose have been outlined below. So, let us read these to know how to connect wifi with Brother printer.

1. Start your computer or laptop with the administrator credentials.

2. Turn off all the background programs that may be running.

3. Also, turn off your antivirus software as it can interfere with this process.

4. Use the CD received with your Brother printer to prepare the setup for the printer driver.

Don’t Miss: Connecting To A Wireless Printer Mac

How To Do Wireless Setup For Brother Mfc 9340cdw

Justin Chung12/ 4/19

Its no secret that your Brother MFC 9340CDW All-in-One color machine has many wonderfully modern features such as the ability to copy, print, fax, and scan documents.

Another great feature is its ability to connect to WiFi. Wireless use of the machine can be very useful and time-saving especially to those looking to work remotely without being hassled by a cord or cable.

That means you can sit anywhere in the room and print brilliant quality documents, as long as you using premium Brother TN-221/225 toner cartridges. In order to use this coveted wireless feature, all you need to do is complete wireless setup using your control panel.

Before connecting to WiFi, make sure you have your Network Name and Network Key memorized or written down so setting up wireless connection can be as painless as possible.

Reset Your Wifi Connection

Brother Printer Wireless Setup using the Control Panel

Go to settings in your printer.
Select the Network option.
Press 1 to give your consent to Reset the network.
Your printer initiates to reset network settings.
the printer will reboot automatically.
Try to connect the printer to the Wi-fi again.

IMPORTANT: Make sure your Printer IP is the same as your Router IP. Any conflict in these two wont allow your printer to get connected to the WiFi network.

Don’t Miss: Avery Word Plugin

How To Set Up A Brother Printer Via Wi

Install the Brother QL-810w printer drivers.
When installing the printer drivers, connect the printer’s power cable to the power supply source and the USB cable to your computer.

During the printer driver installation process, you will be asked to enter the printer’s serial number. This number can be found on the label attached to the printer .

Once the drivers are installed, search for Printer Setting Tool on your computer and open it.
Choose Communication settings.
Click General> Communication Settings and confirm the settings are as follows:
Network Settings on Power On: On by Default.
Selected Interface: Infrastructure or Ad-hoc.

Click Wireless Lan> Wireless Settings> SSID > Search and select your network.
Enter the password in Passphrase field.
And click Apply.

Click Wireless Lan> Current Status> Refresh to confirm that the SSID is correct according to the network you are connected.
After clicking Apply, you can disconnect the USB cable from your brother machine.

Please note: If you want to connect Brother printer via Wireless Direct please watch this tutorial.

After the printers are connected to the network, read our article on setting up Brother printer to print visitor labels with beamian Organizer mobile App.