Saturday, October 15, 2022

How To Reset Hp Printer To Factory Settings

Don't Miss

How To Reset Hp Printer Network Settings

Restore Factory Defaults | HP LaserJet Pro Printers | @HPSupport

Using an HP printer through Wi-Fi is a good way to adopt wireless printing technology. Sometimes we face problems while connecting HP wireless printer to the computer. At this time, you need to reset its network settings for a fresh installation. Follow the below-given steps to reset the network settings of various wireless HP printers to restore their default settings so that you can connect it to your computer, phone, iPad, or tablet.

How Do I Reset Hp Printer To Factory Settings

Whether you are using HP Envy 4500 printer or any other printer model, it is very easy to reset your printer. In this section, we have mentioned some quick steps that you can follow to reset your HP printer:

  • First of all, disconnect the power cord and unplug it from the power socket when the printer is turned on.
  • Also, remove the USB cable, if you are using the wired printer.
  • Then, wait for about 2-3 minutes, after which press and hold and keep pressing the Power button on your HP wireless printer for about 30 seconds.
  • Next, plug the power cable into the power socket as well as the back of the printer.
  • Turn ON your printer and wait till the printer finishes its warm-up period and then immediately install all the required HP printer software in your device.

It must be noted that you will be provided about 120 minutes, i.e., 02 hours to complete the software installation process using HP auto wireless connect feature. In case of wireless printer, you must know the WPS Pin of your printer to connect it with your computer.

Run A Power Cycle To Reset Hp Printer

Start off by plugging out the power connection from your printer and waiting for a while. This will cool down your printer and allow it to go through the reset procedure easily. After waiting for a while plug the connection wire back into the printer and wait for it to respond, stabilize and get steady. After this you can follow the next step to reset it to factory settings

You May Like: What To Do With Unused Ink Cartridges

The Quick Steps To Bring Back The Factory Settings On Your Hp Printer

  • Reset the printer to restore the default factory settings.
  • Note that the language, tray size will remain the same.
  • Go to the print queue and cancel the print jobs.
  • Turn off the HP printer and remove the power cord.
  • Leave the printer undisturbed for at least 30 seconds.
  • Insert the power cord directly into an electrical outlet and switch it on.
  • Press and hold Resume for 10-20 seconds, and the Attention light turns on.
  • Unhold the Resume button and the product restores the factory setting.
  • How To Reset Factory Default Settings For Samsung Printers

    How do I Reset My HP Printer to Factory Settings ...

    Samsung Printers also offer three different reset options.

    Basic Resetting

    1. You have to press the keys in quick succession MENU # 1 9 3 4. The display will show TECH.

    2. Select the MENU key again followed by ENTER. The display will show TECH MODE.

    3. Press the < key two times. The operator panel will show NEW CARTRIDGE.

    4. Select ENTER. The panel will show YES.

    5. Press ENTER again.

    6. Exit from this mode by pressing MENU # 1 9 3 4 again.

    Using Raw and Simple Package

    The Raw Package contains original firmware upgrades from Samsung with the patches and firmware downloads. Using this package you will need to run the complete steps.

    The Simple Package contains the patched version of firmware so you only need to run the final step.

    1. Run the firmware downloader. DO NOT turn off or disconnect the printer/computer during this process.

    2. To exit the downloader, press any key turn off your printer for about 10 seconds and turn it back on.

    Manual Reset

    1. Push the power button until the LED light turns off.

    2. Remove the power cord from the back of the printer and leave the printer unplugged for at least five to 10 minutes.

    3. Plug the printer back in.

    4. Press and hold the stop button for two to three seconds until the demo page begins to print.

    You May Like: Hp Deskjet 2540 Says Offline

    How To Reset The Password On Your Hp Printer

    There are a few different ways to reset the password on your HP printer. Its a good idea to periodically change the password on your printer, especially if it is used by groups of people, like in an office or classroom setting.

    HP Printer Password Reset: Method 1

    • With your printer on, press and hold the Wi-Fi button and the cancel button simultaneously. This will put your HP printer into setup mode.
    • Download the HP Smart app onto your Android device or iPhone to complete the password change procedure.
    • Within the HP Smart app, choose Printer Setup.
    • Scroll to the bottom and choose Advance Settings.
    • Select Settings and Security.
    • Choose Password Settings from the drop-down menu.
    • You will be prompted to choose a new password for your HP printer.

    HP Printer Password Reset: Method 2

    You can use this method without downloading the HP Smart app.

    • Press the Home button on your HP Printer
    • Select Settings
    • Enter a new password and save changes

    To Reset Hp Wireless Printer Factory Settings

    In this section, we will discuss easy ways to reset the Hp printer factory settings. Following are the steps:-

    • Firstly, turn off the printer and disconnect the power cord and unplug it from the wall outlet.
    • Secondly, Remove the USB cables.
    • Press the printer power button and hold it for about 30 seconds.
    • Now, Plug the power cable into the wall outlet and then plug in again the power cord to the printer.
    • Turn On the Hp printer and Install HP printer software.

    You May Like: Printer Ink Programs

    Back Up Important Files

    HP recommends that you back up your files on an external drive or CD/DVD on a regular basis. Scheduled backups can help you recover some, if not all, of your information in the event that something happens to the original files on your computer.

    Factory resetting your computer destroys all the files on the hard drive. If you did not back up your files before running a factory reset, the computer might display a prompt to make a backup copy of your files before the reset performs any action that erases or deletes files.

    For more information on backing up your important files, see HP PCs – Backing Up Your Files.

    How To Reset Hp Printer To Its Factory State

    Restore Setup Mode on HP Printers Without a Touchscreen Display | HP Printers | @HPSupport

    The process will differ quite a bit considering the model of your HP printer so it is a good idea to check the official HP Printer Manual. In case your printer has its built-in screen, there is a reset option within the Setup menu, presented as the gear icon. Once there, you need to click on Tools, and on the following screen select Restore Factory Defaults. The printer will then ask you to confirm this is what you want to do. Once you select Yes, or Continue, the printer will go on and reset itself to factory settings.

    More advanced printers, like the OfficeJet Pro 8600 have a different approach to the factory reset procedure. In this case, you need to turn off your device and wait at least 10 seconds before attempting to power it on again. Once you turn on the printer, the Back button on the panel needs to be pressed four times and then you will be able to access the Support menu. Inside this menu, there will be a section called Resets. Within, there are several options to pick from, such as performing a full reset or a partial reset. Select the option you want and let the printer do its job.

    Resetting HP printers can be done in multiple ways and here we covered just the two most common types of the procedure. Please hold on as we complete our fully featured article related to resetting HP printers to their factory settings, as there is a lot of ground to cover.

    Recommended Reading: Printer Is Turned On But Says Offline

    D For Tango / Tango X Printers

    1. Press and hold the Wireless button on the back of the printer for 5 seconds or till the blue color edge lighting starts rotating.

    You have seen 4 types of HP printer reset process. If the above reset process doesnt work on your HP printer then leave the model number in the comment section down below.

    Questions & Answers

    Performing A Hard Reset On The Hp Printer

    When the printing unit detects an issue with the cartridge, a software flag is set inside the device. This flag might not reset until a hard reset is performed on the printer.

    HP Deskjet and HP Photosmart printers

  • Verify that the printer is turned on.
  • Open the printer and remove both cartridges.
  • Unplug the power cord and other cables from the printer.
  • After 10-15 minutes, plug the power cord and other cables in to the printer.
  • Open the printer and reinstall both cartridges.
  • Switch the printer on.
  • Print a test page. If the problem persists, replace the cartridge.
  • HP Officejet and HP PSC all-in-one

  • Verify that the unit is turned on.
  • Remove the power cable from the back of the printer.
  • Wait 30 seconds.
  • Recommended Reading: Hp Deskjet 2540 Printer Offline

    Touchscreen Control Panel With Black Background

    Follow these steps if your printer has a touchscreen control panel with a black background.

    Touchscreen with black background

  • From the Home screen on the printer control panel, touch the Setup icon (or

  • Scroll to and touch Service.

  • Touch the Restore Defaults option, and then touch the OK button.

    The printer automatically restarts.

  • Epson Printer Firmware Reset

    Factory Reset HP LaserJet M277dw

    Firmware updates are necessary to keep your printer software running smoothly. But occasionally youll download a firmware update that messes with your printer operation .

    Fear not it is possible to reset your firmware to a previous version. Its called a firmware downgrade.

    This should complete the firmware reset of your Epson printer.

    Read Also: My Hp Printer Won’t Print Black Ink

    How To Cold Reset An Hp Laserjet 1022n Printer

    Users of the HP LaserJet 1022N printer may need to perform a cold reset on the device at some point. Occasionally, print jobs will fail on the HP LaserJet 1022N, and the jobs will remain stuck in the print queue. When a print job is stuck in the queue, subsequent jobs cannot process. Print jobs often fail because of a faulty connection between the computer sending the print job and the printer. The cold reset will remove the failed print jobs from the queue, reset the page counter and return the printer to factory default settings.

    Step 1

    Turn the printer off.

    Step 2

    Press and hold the Go and Cancel buttons while turning the printer on. The three lights on the control panel will blink in sequence, and then they will begin to flash at the same time.

    Step 3

    Release the Go and Cancel buttons when the three lights flash together. The cold reset has been performed.



    • Before performing a cold reset, check that the printer is powered on. If the printer is off, the print job will fail. However, after the printer is turned on, the jobs in the queue will process. If the print jobs in the queue still will not process, a cold reset will resolve the issue.

    Writer Bio

    More Articles

    Easily Reset Your Hp Printer To Default Factory Settings

    People all across the globe use HP Printer and the reason is clear, they are the best, easy to use, and make printing a smooth experience. Although sometimes you found yourself in a situation when your printer is not working as expected Print jobs stuck in a queue, Printer offline, or maybe HP wireless printer not connecting.

    These types of errors are very common among printers from any manufacturer. The good thing is HP offer various solutions to fix these error. In case, nothing works then you can use the Reset feature.

    Also Check: Mfc L2700dw Connect To Wifi

    Hp Printer Out Of Paper Reset

    We love our HP printer except when theres an erroneous message about the paper being empty.

    There are plenty of sheets in the paper tray…why doesnt the computer see that?

    One solution to this problem is to reset your HP printer by unplugging it.

    Its a pretty simple process:

    • With the printer turned on, pull out the power cable from the back of the printer
    • Unplug the power cable from the wall outlet
    • Wait 15 seconds
    • Plug the power cable into the back of the printer
    • Plug the printer back into the wall outlet
    • Turn the printer back on
    • Run a test print

    Following these steps will reset your HP printers out of paper message.

    Use The Resume Button To Reset Hp Printer

    HP OfficeJet Pro 8020 Reset To Factory Defaults Setting.

    Basically you will need to press and hold the resume button for about 20 seconds or until the attention LED pops up. This is a sign that the printer is getting ready for the factory reset. This is your cue to leave the button. After a few seconds the ready light will pop up and later the printer may turn off. This indicates that the reset procedure is complete and that the printer is restarting. After the printer starts up again and stabilizes you will be able to set it up again. The process of reset hp printer with the use of resume button is complete.

    Also Check: Hp Envy Prints Blank Pages

    How To Reset Your Canon To Factory Settings

    You may want to reset your Canon to its factory default settings. This is a good idea if your printer is acting buggy set everything back to factory settings.

    Here’s how to reset a Canon printer to its factory settings:

    • Press the Menu Button on the front of the printer.
    • Use the arrow buttons to locate the Setup Menu and select OK
    • Use the arrow buttons to select Device Settings and select OK
    • Select Reset Settings and select OK

    This will begin the process to reset your Canon to its factory settings.

    Resetting a Canon to factory default settings is a sound solution to the dreaded B200 error message that plagues some Canon owners. This method works to reset Canon Pixma MX922 printer as well as other Canon printer models.

    Tech Support Expert A Professional Tech Service Provider

    Our company tech support expert is one stop solution provider to the tech users. We are certified company which provide technical assistance to the gadgets or device users. We have a team of highly-experienced technicians which help you with the best and easy methods. We are third party service provider and help you with all your technical glitches, Our remote services makes your work a lot more easier and provide services at your comfort zone so that at your place without any hassle you can use your device.

    To avail our services you can connect with us though call or mail. To get in touch with our customer care representative dial our number 800-742-9005. This is our toll-free number and our lines are open 24*7 throughout the year. With no call-waiting we will answer your call and help you to fix your technical glitch. If you are busy and couldt call us, you can mail us also, write us atTry our assistance and you can see a positive change working with your devices.

    Read Also: Getting Hp Printer Online

    How Do I Do A Cold Reset On My Hp Printer

    • Turn the printer power off.
    • Press and hold GO.
    • Turn the printer power back on and continue to hold GO until the Attention light turns on.
    • Release GO.
    • The device lights will start blinking from front to rear. Wait till the cold-reset process is successfully completed and after which the device will go to the ready state.

    How To Factory Reset Hp Officejet Pro 8620

    How to Reset an HP Photosmart Printer: 11 Steps (with ...

    A factory reset is done to restore the system settings to default. This option is used to rectify the minor errors and clear out the memory. If your HP Officejet Pro 8620 is not working due to system error displayed on the screen and printer is unable to print, performing the process of how to factory reset HP Officejet Pro 8620 will help you overcome these issues. There are three reset types you can choose depending on the intensity of the issue. Refer to the simple reset guidelines provided below to bring back the default factory settings on your printer.

    Don’t Miss: Why Does It Say The Printer Is Offline

    Simple Ways To Factory Reset Hp Officejet Pro 8620 Printer

    • Turn ON your printer, complete the on-going task, or cancel all the pending tasks.
    • Wait for the printer carriage to be idle and silent before you continue.
    • Unplug the power cord from an electrical outlet.
    • Connect the cord back into the outlet.
    • Plug in the power cable to the rear side of the printer.
    • Turn on the printer. You can see a warning message and lights flashing on the printer. The carriage shifts to the access area.
    • Wait for a few minutes.
    • Try removing and reseating the printhead 2-3 times.

    How To Reset Factory Default Settings For Sharp Printers

    Navigate to the Power Reset screen on your computer. Here, you have two options:

    Reboot the MFP This restarts the machine. When you tap the key, the Restart screen appears. When you tap the key again, the machine will restart.

    Enter The Power Save Mode This shifts the machine to power save mode. When you tap the key, the Power Save Mode screen appears. When you tap the key again, the machine will switch to the Auto Power Shut-Off mode.

    Read Also: How To Scan From Printer To Computer Mac

    More articles

    Popular Articles