Remove The Existing Cartridge
Prepare the printer to accommodate your new ink cartridges by removing the old ones. Once you remove the used cartridges, make sure they are not accessible to young children or pets. Be careful not to let your skin come into direct contact with ink while replacing cartridges.
- Canon
To remove the existing cartridge for both the PIXMA and the MG/MX models, push down gently on the old cartridge, and it should click and then become dislodged. Then you should be able to pull it out. If you want to replace the color Canon printer ink cartridges, take out the cartridge from the left-hand slot. To replace the black ink, take out the cartridge from the right-hand side.
- HP
Facing the printer, push down on the existing cartridge gently, and it should slide down out of the holder. Be careful not to push down on the cartridge too hard.
- Epson
There should be a little clip on the top of the cartridge as youre looking down on it from above the printer. Press the clip with your forefinger and use your forefinger and thumb to lift out the cartridge.
Insert The New Ink Cartridge
Take the new ink cartridge out of its package and gently remove the protective tape .
Insert the cartridge into the holder at a slant .
Push the cartridge in and up firmly until it snaps into place. The color cartridge goes on the left and the black on the right.
Insert the cartridge so it doesn’t hit the electrical contacts on the cartridge holder. Don’t touch the metallic parts or other parts inside the machine.
Check to make sure the cartridges are installed properly and lined up evenly.
Close the cover.
Remove The Empty Cartridge
Make sure the printer power is on.
Retract the paper output tray and the output tray extension.
Open the cover. The cartridge holder moves to the replacement position. Wait until the holder stops moving. Don’t touch it or try to stop it.
If the cover is left open for more than 10 minutes, the cartridge holder may move and the Alarm lamp light. If this happens, close then reopen the cover.
Push down on the ink cartridge until it clicks, then remove it . Don’t touch the electrical contacts or print head nozzle . The machine may not print properly if you touch them.
Don’t Miss: How Do I Scan From My Printer To Computer
Ink Getting On Your Skin
Ink can irritate your skin and make you unwell if you drink it. If an ink cartridge spills and comes into contact with your skin, use soap and water or rubbing alcohol to remove it.
If you spill ink in your eye, its best to rinse it immediately with cool water. Then, clean your eye with a saline solution.
If you happen to ingest or drink any of the ink, contact your doctor or another medical professional immediately to ask for advice.
How To Install / Replace Ink Cartridges In Your Hp Officejet Pro 6978 Printer
A brand new HP® OfficeJet® Pro 6978 printer includes set-up HP 902 cartridges, which come in four different colors: black, cyan, magenta and yellow. The thing with setup HP cartridges is that it usually comes with less ink than a regular ink cartridge so you can expect to run out of ink fast. For this reason, if you think youll be printing a lot with your HP OfficeJet Pro 6978 from the get-go, its good to have a set of HP 902 ink cartridge replacements at the ready.
The nice thing about this printer is that you can replace each color as needed. If you are running low on black you can just replace the 902 black, if youre running low on magenta, you can just replace the 902 magenta. In this article, we will be replacing the magenta cartridge.
For a quick demonstration of the installation process, see our video below. Or, continue reading for a step-by-step tutorial, including a great way to save on ink cartridge costs!
You can also use these instructions to replace cartridges in the HP OfficeJet 6954 and the OfficeJet Pro 6968.
Also Check: How To Get Printer Back Online Hp
Refill Your Printer Cartridge
Draw ink into the syringe slowly and inject it into the hole. That’s it!Some important tips:1. The needle size is very small. If you draw ink into the syringe too quickly, you can create air-gaps. Air gaps can block your ink cartridge. So make sure that there are no air bubbles, before you inject ink through the hole. 2. Refilling is a messy job. Make sure you have a piece of paper/waste cloth. The image has a clean background only to make it look good! 3. I was advised to fill the cartridge to near-capacity and not full. i.e., my cartridge’s capacity is 19ml. So I filled it to about 13ml. Probably this is to prevent leakage.4. Once, the cartridge is filled, it should be allowed to set for a few hours. This lets the ink to settle at the bottom of the sponge. The sponge is located inside the cartridge & cannot be seen. P.S. Sorry for the poor image quality in this instructable. I ruined it by putting the camera too close to the objects.Acknowledgement: I was “taught” to fill ink by my neighbor Sridhar. Thanks very much!
Removing And Installing Ink Cartridges
Read Also: How Do I Connect My Phone To Wireless Printer
Brother Dcp T300 Yellow Ink Not Working
- Check if the Brother cartridges are installed properly in your printer. The next step is to print a Quality Check Sheet.
- To do so, press the Menu key on the control panel of the Brother DCP T300 printer.
- Choose the Ink Management option using the Up and Down arrow keys. Select the Test Print option and then choose the Print Quality option.
- Tap the Color key to print the Quality Check sheet. If the print quality is not satisfactory, then tap the Color button to initiate the cleaning process.
- Print a Quality check sheet after the cleaning process. If the print quality is still not good, then repeat the cleaning process again.
How To Setup Brother Dcp T300 Printer
To install the Brother DCP T300 printer, read and proceed the instructions given below.
- Initially, you need to unpack the printer if you are installing the new Brother DCP T300 printer.
- Using a scissor tear the top protective tape of the printer package.
- Slowly, take the Brother DCP T300 printer out of the package and keep it in a large surface area or on a table.
- Set your preferences on the control panel.
- Now, turn on your Brother DCP T300 printer and set your region, country, date, time, and default language.
- Insert the ink cartridges into the Brother DCP T300 printer.
- Lower the ink cartridge access door and open the cap of the ink color that you want to fill.
- Unbox the ink bottle by removing the film from it.
- Make sure to take the tip cover of the ink bottle before you place it in the Brother DCP T300 printer.
- Make sure to place the ink bottle correctly on the printer.
- After that, load a stack of plain paper into the Brother DCP T300 printer. For more guidelines for How To Install Brother DCP T300 printer.
Read Also: Which Epson Printers Use 200 Ink
How Do I Replace The Ink Cartridge
Replace the Ink Cartridge by following the instructions below:
Pull the lock release lever down and take out the ink cartridge for the color shown on the LCD.
Open the new ink cartridge bag for the color shown on the LCD, and then take out the ink cartridge.
Remove the protective yellow cap. DO NOT touch the area shown in the illustration below.
Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.
Lift each lock release lever and gently push it until it clicks, and then close the ink cartridge cover.
The machine will automatically reset the ink dot counter.
Hp Deskjet D4360 D4363 And D4368 Printers
This document is for HP Deskjet D4360, D4363, and D4368 printers.
caution:Do not touch the ink nozzles or copper contacts on the ink cartridge.Touching these parts will result in clogs, ink failure, and bad electrical connections.Do not remove the copper strips. They are required electrical contacts.
Recommended Reading: Brother Hl2270dw Setup
Ways To Install Ink Cartridges On Your Printer
Dont know how to install ink cartridges on your printer? Relax, because we got you covered! We have prepared you a step-by-step guide on installing ink cartridges on your HP and Canon printer. Most printers work similarly, which means installing a new cartridge on any printer will be easy once you learn the basics.
How to Put Ink in a Canon Printer
Notes On Fine Cartridges
Important
-
Do not touch the electrical contacts or print head nozzle on a FINE cartridge.The machine may not print properly if you touch them.
- If you remove a FINE cartridge, replace it immediately.Do not leave the machine with the FINE cartridge removed.
-
Use a new FINE cartridge for replacement.Installing a used FINE cartridge may cause the nozzles to clog.
Furthermore, with such a FINE cartridge, the machine will not be able to inform you when to replace the FINE cartridge properly.
- Once a FINE cartridge has been installed, do not remove it from the machine and leave it out in the open.This will cause the FINE cartridge to dry out, and the machine may not operate properly when it is reinstalled.To maintain optimal printing quality, use a FINE cartridge within six months of first use.
Note
-
If a FINE cartridge runs out of ink, you can print with either color or black FINE cartridge, in whichever ink remains, only for a while.However the print quality may be reduced compared to when printing with both cartridges.We recommend to use a new FINE cartridge in order to obtain optimum qualities.
Even when printing with one ink only, print with leaving the empty FINE cartridge installed.If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print.
You May Like: How Do I Connect My Wireless Printer To My Phone
Can A Normal Printer Print On Glossy Paper
In short, yes, laser printers can print on glossy coated paper. As long as the right type of paper is used to allow the toner to fuse with it, great printing effects on glossy paper can be achieved with any laser printer. However, to ensure the best printing results, several factors must be considered.
How To Put Ink In A Printer
When it comes to the amount of money you have to invest in various computer peripheries, printers would probably come at the top as some of the most dough-thirsty contraptions out there.
That said, having a printer at home or at the office that you can use whenever you feel like is always a better option than being forced to go to a professional photocopier to do the same thing. In this article, we will talk how to put ink in a printer.
For the record, in the passages below, weve chosen three printer models from different manufacturers as examples.
Without further ado, heres how to put ink in a printer.
Recommended Reading: What Epson Printer Uses 202 Ink
How To Save On Printing Costs
If you are looking to save money on ink, consider purchasing aftermarket high yield HP 902XL cartridges by LD Products. LD brand aftermarket 902 cartridges are proven to deliver the same results as an original HP cartridge for a fraction of the cost. They are filled to the same capacity as the HP brand and are backed by an industry best lifetime guarantee. The LD aftermarket black 902XL cartridge is offered at $19.99* and each aftermarket cyan, magenta, and yellow 902XL cartridge is priced at $10.99 apiece. If you want to save you even more, LD Products also carries a bundle set of 4 HP 902 aftermarket cartridges for $49.96 and a 9 pack for $119.97!
*Savings based on price comparison between remanufactured/compatible cartridge prices and printer brand cartridge prices effective as of May 3, 2021 on www.LDProducts.com. OEM names are registered trademarks of their respective owners and are not affiliated with, and do not endorse LD Products.
Prepare The New Hp Ink Cartridge
- Remove the new ink cartridge from its packaging.
- The new cartridge will either come with a blue top or black for the tri-color and black ink cartridge.
- The tri-color ink cartridge has a blue top while the black ink cartridge has a black top.
- Take out the protective tab on the ink cartridge. Its a plastic film that seals the area of the cartridge that dislodges ink.
- Please avoid touching the coppered-colored areas of the ink cartridges or ink nozzles. Doing so may result in ink clogging and other HP cartridge issues.
Also Check: How To Connect Hp Printer To Iphone
Remove The Old Or Empty Hp Ink Cartridge
If the ink cartridge has a protective cover, lift the cover to release its lock.
- Press down on the empty ink cartridge until it clicks and pops out.
- Pull the empty cartridge out from its slot and set it aside for disposal, recycling, or refilling.
- There are HP printers that feature individual cartridges for each color. If you are using this kind of printer, follow the same steps for installing or replacing each color cartridge.
Brother Dcp T300 Showing Offline
- Check if the Brother DCP T300 printer is turned on and associated with a proper power supply.
- If the printer is in the sleep mode, tap the Power button to wake it up.
- Check if the LCD screen is displaying any error message. Troubleshoot the corresponding issue.
- In case of a USB connection, check if the USB cable is connected firmly to the Brother printer and the computer.
- Checked if you have connected them to the same wireless network.
- Print a network configuration page and check if both the IP addresses are the same.
- Launch the Control Panel on your system and select the Hardware and Sound option followed by the Devices and Printers option.
- Check if your printer is set as the default. If not, right-click on your Brother printer and select the Set as Default Printer option.
- Go to the Printer menu and select the Cancel All Documents option to clear the print queue. This problem might occur if there are too many documents in the print queue.
- Right-click on your Brother DCP T300 printer and select the See Whats Printing option. Remove the tick mark near the Use Printer Offline option.
- Assign a test print job to check if the printer offline issue has been resolved.
You May Like: How Do I Find The Wps Pin For My Printer