Replacing An Ink Cartridge
If ink gets in your eyes, immediately wash them out with water. If irritation occurs, please consult a doctor.
1. Make sure your Brother machine’s power is turned on.
– Your Brother machine’s display should read ‘No Cartridge. Install Ink Black.’
2. Open the ink cartridge cover on the right-hand side of your Brother machine’s front panel.
3. Remove the green protective part from the inside of the Brother machine.
– Do not discard the green protective part. You will need it if you transport your Brother machine.
4. Unpack the ink cartridge indicated on your Brother machine’s display.
5. Turn the ink cartridge’s green knob clockwise until it clicks.
6. Remove the yellow protective cap from the ink cartridge.
7. Install the ink cartridge into its appropriate, color-coded slot .
– Install the ink cartridge in the direction indicated by the arrow on its label.
8. Gently insert the ink cartridge until it clicks.
9. Repeat steps 4 – 8 for each cartridge.
– Once you have installed all four ink cartridges, go to step 10.
10. Close the ink cartridge cover.
Your Brother machine will prepare its ink tube system for printing. This process will take approximately four minutes. Do not turn off your Brother machine during this process.
Here Are The Most Common Reasons Why Your Printer Isnt Recognising A Cartridge:
Internal memory reset needed:
Your printer should automatically recognise when you install a new cartridge and reset its internal memory, ensuring that its displaying full ink and toner levels etc. However, sometimes the printer just doesnt do that correctly and believes that the old one, or no cartridge, is currently inserted instead.
Protective strips havent been removed:
If you havent removed protective covers or plastic strips that are attached to a new cartridge when you first take it out of its packaging, the printer will fail to register the new cartridge and this will cause problems. Take the cartridge out of your printer and make sure all strips, tabs or plastic covers are removed before installing the cartridge again.
Dirty / damaged contacts stop chip data being read:
The new ink or toner cartridge has a number of metal contacts that connect to similar metal contacts in the printer allowing them to communicate. Dirt or damage on the contacts inside the printer can prevent the contacts from connecting and can stop the printer from reading the information on the chip.
HP Cartridge Protection is enabled
The Incorrect consumable installed in a slot:
Take all the cartridges back out of the printer and double check they were in the correct colour slots and all the required cartridges are present. If not, reinstall them and switch the printer off and back on to reset the system.
An Ink cartridge has not been inserted in its slot correctly:
How To Save On Printing Costs
Want to save money on printer ink? Try using aftermarket or third-party, high yield printer ink cartridges from YoyoInk. Aftermarket printer ink cartridges from YoyoInk are guaranteed to deliver the same results as genuine ink cartridges for a fraction of the cost. They use the same ink quality as the leading brands like HP, Canon, and Epson and are backed by a 100% satisfaction guarantee.
Also Check: How To Connect Canon Ts3122 To Wifi
Replace The Ink Cartridges
caution:Do not touch the copper-colored contacts or the ink nozzles.Do not replace the protective tape on the contacts. Handling these parts can result in clogs, ink failure, and bad electricalconnections.
note:Install the color ink cartridge on the left and the black ink cartridge on the right.
Ways To Install Ink Cartridges On Your Printer
Dont know how to install ink cartridges on your printer? Relax, because we got you covered! We have prepared you a step-by-step guide on installing ink cartridges on your HP and Canon printer. Most printers work similarly, which means installing a new cartridge on any printer will be easy once you learn the basics.
Read Also: What Is Microsoft Xps Document Writer
Replacing A Fine Cartridge
When remaining ink cautions or errors occur, the error message will appear on the LCD to inform you of the error.In this state, the printer cannot print or scan.Check the error message and take appropriate action.
Do not touch the electrical contacts or print head nozzle on a FINE cartridge.The printer may not print properly if you touch them.
If you remove a FINE cartridge, replace it immediately.Do not leave the printer with the FINE cartridge removed.
Use a new FINE cartridge for replacement.Installing a used FINE cartridge may cause the nozzles to clog.
Furthermore, with such a FINE cartridge, the printer will not be able to inform you when to replace the FINE cartridge properly.
Once a FINE cartridge has been installed, do not remove it from the printer and leave it out in the open.This will cause the FINE cartridge to dry out, and the printer may not operate properly when it is reinstalled.To maintain optimal printing quality, use a FINE cartridge within six months of first use.
Handle the FINE cartridge carefully to avoid staining of clothing or the surrounding area.
Discard the empty FINE cartridge according to the local laws and regulations regarding disposal of consumables.
Prepare a new FINE cartridge.
Take new FINE cartridge out of its package and remove protective tape gently.
Install the FINE cartridge.
Insert the FINE cartridge gently so that it does not hit the electrical contacts on the FINE cartridge holder.
How To Install Ink Cartridges In Hp Canon And Epson Printers
Joseph LoncaricInstall New Ink Cartridges in HP Printers –
- Open printer tray: At first, you need to take the tray of your HP printer carefully. In this step, you should turn on the printer power.
- Remove the old cartridges: Once you have removed the printer tray, you have to pop out the existing cartridges of your printer. When you press the cartridge, it will be disengaged from the cartridge holder. They take it out very carefully.
- Install the new ink cartridge: Now unwrap the new ink cartridges from the packages and install them into the ink slots. While installing the cartridges, dont damage the other components inside the printer. Once you have done, you have to close the printers tray properly.
Install New Canon Printer Ink Cartridges –
- Open the printer tray: Canon printers such as MG or MX series generally have FINE ink cartridges. So, it comes with a center output cover which is located at the above of your output tray. You need to take out the ink tray.
- Take out the existing cartridges: Like HP printers, you need to take out the old ink cartridges after removing the ink tray. At first, press the cartridges and then remove them from very carefully.
- Insert the new ink cartridge: Now open cartridges from the wrappers and insert them into the ink brackets inside your printer. You should follow the manufacturers instruction during installing the new cartridges. When the installation is done, close the ink tray.
Install New Epson Printer Ink Cartridges –
Recommended Reading: How Do I Connect My Printer To My Laptop
Incorrect Ink Cartridge Installation
In the Epson inkjet, the ink drop button in the center of the control panel on the front of the printer will light up if your ink cartridge has not been installed correctly.
If the power button continues to flash after several minutes rather than becoming constant, this is a sign of improper installation.
If this happens, press the red STOP button on the control panel and re-open the scan lid. Then, press down lightly on the new ink cartridge until you hear a clicking sound as it fits properly into place. Repeat the process outlined in Step 5 to try to insert the new ink cartridge properly.
How Do You Dispose Of Empty Ink Cartridges
InkRecycling.org helps you get paid for your old ink cartridges with just a few quick steps! The entire return procedure takes less than 15 minutes from start-to-finish: locate which model numbers are in need of returning fill out how many units total before being returned. Our recycling checkout calculates what amount will be credited when all said figures have been added together based on the cartridges you’re sending in. All the information is on our site, and we’re always happy to answer any questions that might come up during this process – so don’t hesitate to live chat or call if need be .
TIP: Always wear gloves when holding ink cartridges to keep the harmful toxins from getting on your skin – HP Black 63 Cartridge pictured above
You May Like: Brother Printer Index Cards
How To Refill An Inkjet Printer Cartridge
This article was written by Nicole Levine, MFA. Nicole Levine is a Technology Writer and Editor for wikiHow. She has more than 20 years of experience creating technical documentation and leading support teams at major web hosting and software companies. Nicole also holds an MFA in Creative Writing from Portland State University and teaches composition, fiction-writing, and zine-making at various institutions. This article has been viewed 1,030,078 times.
This wikiHow teaches you how to save money by refilling your own printer cartridges. Though refilling most cartridges is not usually advised by printer manufacturers, you can find reputable companies that sell printer ink refill kits that work just as well as replacement cartridges.
Clean The Electric Contacts On The Toner Cartridge
Figure : E-label on a toner cartridge
You May Like: Turning A Printer Online
How Do You Put An Ink Cartridge In An Hp Printer
Before you begin, you’ll want to make sure your HP printer is turned on. Also, to avoid damage to your new ink cartridge, don’t open the ink cartridge until you’re ready to use it. Follow these steps to replace your ink cartridges.
Open the ink cartridge access door on the front of your printer with the small handle.
After a few seconds, the ink cartridge should automatically move to the center of the printer.
Wait until the cartridge has stopped moving and your printer is silent, then press down on a cartridge to remove it.
Open your new ink cartridge and remove the plastic pull tab, then holding it by the sides with the ink nozzles towards the printer, insert the cartridge at a slight upward angle. Press the cartridge in until it snaps into place. Repeat for the other ink cartridge.
Close the ink cartridge access door. It’s recommended to print an alignment page to ensure the cartridges are aligned and the printer prints properly.
What Can You Do With Old Ink Cartridges
InkRecycling’s Ink Cartridge trade in program will take your empty cartridges and give you cash, or we’ll donate proceeds to charity. Our process is 100% transparent allowing you to get the most money for selling your empty cartridges.
Our Recycling Portal allows you to track your recycling through the entire process. We’ll let you know how your empty cartridges are being handeled each step of the way.
INK TEAM FACT:
Our team inspects each cartridge by hand using verified inspection practices. We document the whole process and send you a recycling report once the inspection is complete. Due to the large amount of cartridges we process, please expect your payment to be sent within 30 days after our office receives your empty cartridges.
You May Like: How To Connect Canon Ts3122 Printer To Iphone
Two: Remove And Replace The Cartridge
caution:Do not touch the copper-colored contacts or the ink nozzles. Touching these parts can result in clogs, ink failure, and bad electrical connections. Also, donot re-tape the cartridges. Doing so can result in clogs, ink failure, and badelectrical connections.Figure : Do not touch electrical contacts or ink nozzles
How To Load An Ink Cartridge In A Canon Printer
Changing ink cartridges is a routine part of printer maintenance, and you may find that you need to do so frequently if the Canon printer in your office sees regular use. Your Canon printer has an access door on the top or front of the unit, allowing you to remove or check the status of the installed ink cartridges. Open your printer’s access door when print quality declines due to faded or missing colors, and replace the empty ink cartridge to return the printer’s output to its normal quality.
Locate and open the access door for your Canon printer. In most cases, you can access the printer’s ink cartridges by placing your hand under the top panel of the printer and lifting up. If your printer has a built-in scanner, locate and lower the plastic arm on the underside of the scanner bed to lock the panel in place. Some Canon printer models, such as the PIXMA PRO-1, do not have top access doors in this case, look for access panels on the left and right sides of the paper tray, then pull them forward to open them.
Locate the empty cartridge by checking the status lights that become visible after you open the access door. The status light for a cartridge blinks or turns off when the cartridge is empty.
Push the tab above or in front of the empty cartridge to release it from its slot. Lift or pull the cartridge out of the Canon printer.
Don’t Miss: What Does Collated Copies Mean
How To Put Ink In A Printer
Changing printer ink cartridges is usually a straightforward process. However, different brands of printers may require you to follow different procedures for changing ink. Thats why well be explaining how to put ink in your printer, whether you have an Epson, HP, or Canon brand device .
If your printer brand isnt covered in this article, or your printer model requires different instructions, try searching your printer brand and model number on Google. That should point you in the right direction.
Can I Put Ink Cartridges In The Recycle Bin
The Answer is NO!…Here’s why: Did you know that each year, millions of empty inkjet and toner cartridges end up in our landfills? It’s easy to recycle these valuable resources. By recycling them we can help reduce solid waste as well as conserve raw materials which is environmentally beneficial for us all! Most refillable or recyclable printer cartridges are able be reused 6 times before needing a replacement so it really doesn’t make sense when companies just throw away their old ones thinking they don’t have enough customers who need new printing supplies every month.
You may not know that printer ink is a finite resource and when it runs out, your office will be forced to stop printing. This could lead to major problems with productivity as well as serious illness due the lack of cleanliness in an environment where people are constantly exposed to dangerous chemicals released by attempting to refill the cartridges yourself.
You May Like: What Does Collate Mean In Print
How Do You Put A Toner Cartridge In An Hp Printer
If you have a Laserjet HP printer instead of an ink printer, you’ll still need to replace the toner cartridges from time to time. The process is pretty similar to replacing an ink cartridge, but there are some differences. Here’s how to do it.
Lift the scanner portion of the printer, then lift the top cover of the printer until it snaps in place.
Pull out the toner cartridge using the handle and sliding it upwards until you’ve removed it.
Open your new toner cartridge by pulling the release tab on the outer packaging.
Hold the cartridge by the handle and align it with the tracks inside the printer, then slide it into the printer until it clicks in place.
Lower the top cover as well as the scanner on the printer.