Saturday, October 15, 2022

How To Instal Ink Cartridge To Hp Printer

Don't Miss

What Ink Does Hp 3830 Use

Installing Ink Cartridges in Your Inkjet Printer | Inkjet Printers | @HPSupport

When factoring in how cost-effective an OfficeJet 3830 is, you need to understand how costly the consumable ink cartridge is as well. As a general rule, cheap ink cartridges are usually linked to higher-priced printers. Cheaper printers, on the other hand, tend to have more expensive consumable ink cartridges in order to recoup the lost cost from the printer.

HP OfficeJet 3830 uses both black and color HP 63 ink cartridges as it’s main consumable.

HP 63 ink cartridges come in two forms, the standard and the high yield cartridge. These are both the exact same size and work interchangeably with your HP OfficeJet 3830 printer. The only difference is that the high yield cartridge, called the HP 63XL, can print more pages than its standard yield counterpart.

In regards to both the color and black HP 63 ink cartridges, the high yield XL version will give you around double the pages of the standard yield. If you opt for the standard capacity, you should keep in mind that the HP 63 color cartridges will produce significantly fewer pages than the black cartridges. This is generally the case with black vs. color cartridges.

But there’s a more in-depth way you can assess how cost-effective an ink cartridge actually is. By using the cost per page calculation, you can get a good idea of how much you will be spending on your printer ink. To calculate the cost per page, simply take the number of pages the cartridge can yield and divide it by the price of the cartridge.

Inkstallation Guides: How To Change An Hp Printer Ink Cartridge

Welcome to the second installment of our INKstallation guides series! This guide will walk you through properly replacing ink cartridges in HP printers.

There are many different types of printers in the HP range including All-In-Ones, inkjets, laser jets and high-end design jets which are primarily manufactured to produce top quality photographic prints. No two HP printer models are exactly the same and as a result of this, the ink used from printer to printer can vary. For example, the HP DeskJet 3050 operates on a tri color and black ink cartridge system, whereas the HP Officejet 4620 printer uses individual cartridges for each ink color. As you may have guessed by now, there is more than one way to change an HP ink cartridge, but never fear, were here to cover all bases.

To offer a step-by-step guide that suits the two main installation styles, we are going to focus on two popular HP printer models: the HP Photosmart 7520 and HP Officejet Pro 8600.

Check If The Paper Tray Isn’t Warped And If It’s Appropriately Settled Once You Close It

  • Please turn off your device and unplug its Power cord.
  • Take out any paper from its Paper Tray and then detach the tray from the device.
  • Make sure the Paper Tray is warped by putting a ruler or something straight beside the edge of the rear. If theres a gap over 1 mm wide between the ruler and tray, the tray is warped.
  • Once you find that the Paper Tray isnt warped, proceed to the next step. If it is, however, youll need to replace the tray with a new one.
  • Return the Paper Tray to its original position.
  • Rotate the printer onto its side to gain access to its underside. Be sure to hold the Scanner Lid safely in place with your hands while rotating the device.
  • Please make sure that the Paper Trays plastic tab is fixed securely on the retainer slot. Try opening and closing the tray a few times until the tab gets into the slot if needed.
  • Turn the printer back to its original position. Plugin its Power cord and then press the Power button to turn on the device.
  • Conduct a test print. If the problem is still there, proceed to the next solution.

    Also Check: How To Uninstall Printer From Mac

    The Comprehensive Guide For Hp Officejet 3830 Printer

    The OfficeJet series of HP Printers is probably one of the most represented and popular series of home printers. Within the series, one model seems to stand out above the rest, and that’s the HP OfficeJet 3830. Topping many of the Best Printers of 2018 lists, it’s hard to argue that the OfficeJet 3830 isn’t one of the best contenders of the recent years. With its multifunctional all-in-one inkjet printing capabilities, you can purchase in confidence, knowing that this is a highly effective piece of equipment.

    This comprehensive guide will give you all the information that you need for setting up your HP OfficeJet 3830, including pricing, installation of ink cartridges, and a rundown of pros and cons.

    The Ink Stops Working If You Cancel

    HP Officejet 4630 : How to install Ink Cartridge ?

    Heres the kicker: if you cancel, your ink stops working. You read that right as soon as your billing cycle ends the printer will not accept the ink anymore, and youre required to send it back to HP. At least they provide the postage and packaging for that purpose.

    HP doesnt spell out any consequences in their terms of service for failure to send the ink back, so we checked with a support agent. They helpfully explained that nothing happens if you fail to send them back, but the cartridges would stop working. Youll have to buy more ink on your own if you want to keep printing. HP ships specially marked ink as part of this process, and your printer recognizes that it is intended for Instant Ink subscribers only. Its essentially DRM, but instead of locking down a digital movie or book, this locks down a physical product: the ink in your printer.

    Instant Ink requires an internet connection for your printer. HP explains that they monitor your ink levels, so they know when to send you more, but as described in their Terms of Service the other reason for this is to remotely disable your ink cartridges if you cancel, or if there are any issues with your payment.

    Don’t Miss: How To Set Up Printer To Scan To Computer

    How To Load An Ink Cartridge In A Canon Printer

    Changing ink cartridges is a routine part of printer maintenance, and you may find that you need to do so frequently if the Canon printer in your office sees regular use. Your Canon printer has an access door on the top or front of the unit, allowing you to remove or check the status of the installed ink cartridges. Open your printer’s access door when print quality declines due to faded or missing colors, and replace the empty ink cartridge to return the printer’s output to its normal quality.


    Locate and open the access door for your Canon printer. In most cases, you can access the printer’s ink cartridges by placing your hand under the top panel of the printer and lifting up. If your printer has a built-in scanner, locate and lower the plastic arm on the underside of the scanner bed to lock the panel in place. Some Canon printer models, such as the PIXMA PRO-1, do not have top access doors in this case, look for access panels on the left and right sides of the paper tray, then pull them forward to open them.


    Locate the empty cartridge by checking the status lights that become visible after you open the access door. The status light for a cartridge blinks or turns off when the cartridge is empty.


    Push the tab above or in front of the empty cartridge to release it from its slot. Lift or pull the cartridge out of the Canon printer.






    Test The Estimated Ink Levels

    As mentioned earlier, before you even think about swapping cartridges, you should check the estimated ink levels. To do so, press the ink droplet icon from the printers LCD display. From here, you will see whether or not one of your cartridges need to be replaced.

    If youve checked your estimated ink levels and its clear that you need to replace the existing cartridge, proceed to Step 2.

    Also Check: How Can I Connect My Phone To A Printer

    Why You Want To Disable Hp Cartridge Protection

    It makes no sense to have such a restrictive cartridge system. Some of the reasons why you may want to disable the HP cartridge protection include:

    • Youll be prohibited to use refilled or remanufactured HP ink cartridges
    • You wont be able to use the ink cartridges on a new printer if they have already been loaded to your old one.
    • You cant recycle your ink cartridges which means they will end up as trash once they are empty
    • HPs cartridge protection setting can sometimes work against brand new genuine or started cartridges as reported by some users.

    Fortunately, theres a way to disable HP cartridge protection and make generic ink cartridges work on your printer. And the good news is its relatively easy to do on your own even without any technical know-how.

    Learn More:

    Removing And Installing Ink Cartridges

    Replace the Cartridge | HP OfficeJet 4650 Printer | @HPSupport
  • Turn onyour product.
  • Lift upthe scanner unit.Caution:Do not move the print head by hand otherwise,you may damage your product. Do not touch the flat white cableinside the printer.
  • Pressthe stop button.
  • If a cartridge islow or expended, the print head moves that cartridge to theindicator position. Press the stop button again to check foradditional low or expended cartridges. When all cartridges havebeen identified, the print head moves to the replacement position.
  • If no cartridgesare low or expended, the print head does not move. If you want toreplace a cartridge before it is low or expended, press the stop button for 6 seconds. Theprint head moves to the replacement position.
  • Squeezethe tab on the cartridge and lift the cartridge straight up toremove it.Note: Dispose ofused cartridges carefully. Do not take the used cartridge apart ortry to refill it.Warning: If inkgets on your skin, wash it thoroughly with soap and water. If inkgets into your eyes, flush them immediately with water. If ink getsinto your mouth, spit it out and see a doctor right away. Keep inkcartridges out of the reach of children.
  • Beforeopening the new cartridge package, shake it gently four or fivetimes.Caution:Do not shake the cartridges after opening thepackages, or ink may leak.
  • Removethe yellow tape from the side of the cartridge.Caution:Do not remove any other labels or seals, orink will leak.
  • Insertthe new cartridge into the holder and push it down until it clicksinto place.
  • Lowerthe scanner unit.
  • Read Also: How Do I Put My Hp Printer Back Online

    How To Check The Ink Levels

    If your printer is running low on a particular cartridge color, first, you will want to double check the ink levels on the printer display screen.

    You can do this by pressing the small wheel in the top left corner of the display screen.

    This will open up the main menu. Scroll down to Cartridge Information, then press Estimated Cartridge Levels and a display will appear showing you your estimated cartridge ink levels.

    As you can see, both the magenta and cyan cartridge are in need of replacement. For the purpose of this article, however, we will only be replacing the magenta cartridge.

    ‘remove And Reinstall Ink Cartridge’

    07-05-201601:13 PM

    printer displays warning ‘remove and reinstall the indicated ink cartridge…’ I have done this repeatedly. Have used this color cartridge a few times successfully and about 75% full. Utilities function won’t let me align or clean cartridge because of the error function. any help?

    Hi ,

    Welcome to the HP Support Forums! I see you are getting a ‘Remove and reinstall the indicated cartridge’, you have repeated this with no success.

    First, I would like you to perform a Hard Reset:

    1. Unplug all cables and memory cards from the printer. Unplug the power cord, directly from the back of the printer while the printer is still turned on.

    2. Unplug the other end of the cord from the power source.

    3. If there is a power module on the power cord, disconnect one end and reconnect it. 4. After 60 seconds, plug the cord directly into a wall outlet . 5. Plug the power cord into the back of the printer. 6. The printer should automatically power back up. If it doesn’t, turn it on with the power button.

    7. Try making a photocopy before connecting any other cables to the printer.

    8. Connect any other needed cables to the printer.

    Any changes? Were you able to clean the cartridge and inside the printer? I would like you to continue troubleshooting on Step 12 here: Fixing Print Quality Problems

    If you are still seeing the error message, I suggest replacing the problem cartridge.

    HevnLghI work on behalf of HPThanks

    Don’t Miss: Canon Printer Scanner How To Scan

    How To Replace An Empty Ink Cartridge In The Hp Deskjet 2732 All

    Make sure you purchase the right ink cartridges for your specific printer and printer region or have your old ones refilled. Cartridges are not compatible between different brands, and often not within the same brand. Unlike other inkjet manufacturers, HP often designs its inkjet hardware to use country-specific consumables. When you unbox a new HP inkjet printer and set it up, you install a set of ink tanks that ship with the printer. As you turn on the device and get ready to use it, an initialization sequence localizes it to the country associated with the ink cartridges you installed. HP recommends that you use Original HP ink cartridges.

    XL cartridges cost more but do provide better value in the long run. They will be able to print almost 2 times as many pages as a regular cartridge. Our advice is that if you print often, go with XL. However, ink can dry up. So if you are not a frequent printer, go with the regular cartridges.

    Ink level warnings and indicators provide estimates for planning purposes only. When you receive a low-ink warning message, consider having a replacement cartridge available to avoid possible printing delays. You do not have to replace the cartridges until the print quality is unacceptable.

    Use the single-cartridge mode to operate the HP All-in-One with only one print cartridge. The single-cartridge mode is initiated when a print cartridge is removed from the print cartridge carriage.

    Replace the ink cartridges

    Align the cartridges

    Finish Installation And Test Your Hp Cartridge

    INKstallation Guides: How to Replace an Epson Printer Ink ...

    Once your cartridge is physically installed in the printer, a confirmation message will appear on your desktop. Press confirm to allow the printer to initialize and prime the system with the new cartridges. Once this is done, your printer will prompt you to do an all-important alignment test. Load paper into the printer and press okay to start the alignment process, before examining the page to check the print quality.

    You can watch the full video here:

    In the event that the print quality is poor, you may have to clean the clean the cartridges dont worry, you wont have to take the cartridges out to do this. Simply go to your printer settings and follow this route to carry out the task:

    settings > tools > clean cartridges

    Also Check: Connecting A Wireless Printer To A Mac

    Depleted Ink Cartridge Incompatible Cartridge Ink Cartridge Failure

    These errors may appear due to a communication breakdown between the printer and the chip on the cartridge. Still, there is a simple fix.

    If you get such an HP printer cartridge problem, first, reset the printer to recover from any errors or failures. Then, with the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source and wait 60 seconds. As your printer had some rest, reconnect the power cord to a wall outlet and the device. Finally, turn on the printer to complete the reset.

    If it didnt help, remove and reinstall the indicated cartridge 2-3 times until it firmly seats in the slot. Then turn off the printer and remove all cartridges. Take a lint-free cloth and dump it in distilled water. Gently wipe the contacts on the cartridge and carriage to remove any dirt or residue.Wait 10 minutes for the contacts to dry, and then replace the cartridge and make sure it clicks securely into the designated slot. Turn on the printer and keep on working.

    Remove The Old Or Empty Hp Ink Cartridge

    If the ink cartridge has a protective cover, lift the cover to release its lock.

    • Press down on the empty ink cartridge until it clicks and pops out.
    • Pull the empty cartridge out from its slot and set it aside for disposal, recycling, or refilling.
    • There are HP printers that feature individual cartridges for each color. If you are using this kind of printer, follow the same steps for installing or replacing each color cartridge.

    Don’t Miss: Uninstall A Printer On Mac

    Remove The Empty Cartridge

    Power on your printer and make sure you have a sufficient amount of paper loaded into the tray. Pull down the front cover of the printer via the slot on the front right of the printer to access the cartridges. Once you have done this, the cartridge carriage will automatically move to the center of the printer.

    To remove the old cartridge, push on the front of the cartridge so it pops out.

    When it does that, pull it towards you to gently slide it from its slot.

    Reset The Hp Printer To Erase Any Error Status With Its Print Process

    Replace the Ink Cartridge | HP OfficeJet 3830 Printer | @HPSupport
  • Detach the Power cord from the back of your Canon printer while the device is still on.
  • Unplug the Power cord from the electrical outlet
  • Allow the printer to cool down for at least 15 seconds.
  • Reconnect the Power cord back into the electrical outlet and then turn on the printer. Let the device warm-up. Please wait for it to stop making noises before you proceed.
  • Pull out the Paper Tray and load it with clean, white paper. See if the paper feeds smoothly.
  • Realign the paper correctly and adjust the Input Tray accordingly.
  • Conduct a test print to see if the printer prints flawlessly. If it doesnt, then continue with the next solution.

    Recommended Reading: How Do I Setup My Printer To My Phone

    More articles

    Popular Articles