Disconnect And Reconnect The Usb Cable
What If The Printer Did Not Connect To The Network
Check for network issues and review setup requirements if the printer failed to connect.
-
Check the network connection: Move the printer and computer or mobile device closer to the WI-Fi router, and then check if the signal quality improved. Try opening a website to see if the internet connection is working properly. If Wi-Fi is slow or intermittent, restart the router by disconnecting the power cord, wait 15 seconds, and then reconnect it.
-
Printer is off or in sleep mode: Touch the printer touchscreen or press the Power button to wake the printer and put it in a ready state. Sometimes the printer status might display Offline when it is actually ready.
-
Restart the printer: Restarting the printer can clear possible error conditions and restore the Wi-Fi connection.
-
Check the printer Wi-Fi signal: If your printer has a light next to a Wireless icon or button , make sure the light is on. Check the wireless settings to make sure the signal is turned on.
-
Print a Wireless Test Report: Search the HP Customer Support website for your printer model, and then search for self test page to find the document on how to print and evaluate the report.
Troubleshoot The Printer Usb Connection
Check the USB cable for damage and recommended length, and then restart your printer and computer.
Turn off the printer and the computer.
Disconnect the USB cable from the computer and printer, and then inspect the cable.
If the cable is damaged or longer than 3 m , replace it.
If the cable is undamaged and shorter than 3 m , connect the cable to a different USB port on the computer. The port should be USB 2.0 or greater. If you are using a USB hub or docking station, connect the cable directly to the computer.
Connect the cable to the printer.
Turn on the computer, and then wait for the start up process to complete.
Turn on the printer, and then add the printer or wait for the computer to install the new device .
You May Like: How Can I Connect My Phone To My Printer
Check The Usb Connection
- Reconnect the USB cable: Disconnect and reconnect the USB cable from the printer and the computer.
- Connect to a different USB port: Connect the cable to a different USB port on the computer. If you are connecting to a USB 3.0 computer port, try connecting to a USB 2.0 port.
note:Make sure you are plugging the USB cable into the USB outlet.Figure : Plugging the USB cable into the USB outlet
- Disconnect from a USB hub or docking station: If you connected the printer through a USB hub or docking station, try connecting the cable directly to a port on the computer.
- Try a different USB cable: Use a different USB cable. HP supports USB cables less than 3 meters in length.
- Disconnect other USB devices: If you have several USB-connected devices, the computer might not have sufficient power for the USB ports to detect all of them. Disconnect other USB devices that are not in use.If removing other devices resolves the issue, HP recommends installing a powered hub to connect multiple USB devices.
Uninstall The Printer Driver And Software
note:
Read Also: How Do I Scan To My Computer From Hp Printer
How To Connect A Printer To Your Computer
Connecting your computer to a printer has become easier than ever as we progress into the age of innovative technology, but it seems as though the number, colors, sizes, and complexity of all the wiring can get lost in translation. Even when you think youve got the hang of connecting point A to point B, it takes a lot more than merely plugging in and out to deliver the right results.
In our digital age, printing comes in two forms – wired and wireless. Well walk you through how to connect a printer to your computer, laptop, or handheld device.
What If My Printer Is Not Found Or The Wired Network Connection Fails
Make sure you are using an undamaged Ethernet cable, check for a green light near the Ethernet port on the printer, and then print a report to verify the connection.
Turn off the printer, and then disconnect the Ethernet cable from the router and the printer.
Check the cable for damage, and then verify that it is an Ethernet cable and not a phone cable.
Note:
Ethernet and phone cables look similar, but Ethernet cables are usually bigger and have eight visible wires on the connector.
Reconnect the cable to a different Ethernet or LAN port on the router, and then connect the other end to the printer’s Ethernet port.
Turn on the printer.
Check the lights on the printer’s Ethernet port to make sure the connection is successful. The green light should be steady, and the orange activity light should blink.
Print a Wireless Network Test Results or Network Configuration report.
Inkjet printers with a control panel menu: Open the Wireless, Network Settings, or Setup menu to locate the list of available reports.
Most inkjet printers without a control panel menu: Press the Wireless and Information buttons at the same time, or press the Wireless and Start Copy Black
Also Check: Can I Print From My Phone Without Wifi
How To Print Using Usb Instead Of Wireless
06-09-202001:37 AM
I just purchased a HP Smart Tank 519 printer. It does wireless printing and it has USB. Wireless printing has become a problem because it often says offline. How can i print using the USB cable instead of the wireless? Appreciate any recommendations. Thank you
Are you using Mac or Windows OS on the computer you wish to connect the printer on?
that said, if it’s windows, here’s what you need to do:
Set up your HP printer for a USB cable connection to a Windows computer. To get the most supported features from a USB connected printer, install the full feature HP driver.
NOTE:
If you are looking for the printer software and driver, go to 123.hp.com or .
Step 1: Prepare for the printer setup
Check requirements and delete any previous installed printer versions from Windows to prepare for the USB connection setup and driver installation.
Confirm the following requirements and items before you begin:
The printer is turned on and in a ready state.
Obtain a USB cable less than 3 m in length.
There is an available USB port on your computer: If you connect through a USB hub or docking station, the printer might not receive enough power to properly operate.
If you connected the USB cable to the computer before installing the HP driver, continue with these steps to remove the printer from the installed devices to help ensure a successful setup. Otherwise skip to the next step to install the driver.
FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK:
Test The Usb Connection
- Move the USB cable to another available USB port. For example, if the USB cable is plugged in front of the computer, move it to a port in the back of the computer.
- Restart the computer and the printer.
- Try the installation again.
- Disconnect the USB cable from the hub or docking station, and then connect it directly to the computer.
- Restart the computer and the printer.
- Try the installation again.If the installation completes after connecting the USB cable directly to the computer, there might be a problem with the hub or docking station. Either leave the USB cable connected directly to the computer, or contact the manufacturer of the hub or docking station for troubleshooting.
Read Also: How To Use Fax Machine On Printer
How Do I Connect The Printer And My Computer Via Usb Cable
Install the printer driver and other necessary software such as P-touch Editor from the section of this website before connecting the printer to your computer using a USB cable.
| 1 USB cable |
*The location of the USB port differs depending on your printer.
How To Connect The Printer To Your Computer
You need to install the printer driver into your computer to print.
The model name and serial number are located on the back of the printer. Make sure you download the correct driver for your model: TJ-4420TN/TJ-4422TN: Brother TJ-44
For more information about driver installation, see the driver installation guide provided with the driver.
If you cannot install the printer driver:
- Bluetooth connection is not available for Mac.
- To use Bluetooth, an optional WLAN / BT Interface is required. For details on installing the Bluetooth interface, see the FAQ: “How do I connect the printer via Bluetooth®/Wi-Fi®/wired network?“
Wi-Fi® Network Connection
You May Like: Connect Computer To Hp Printer
Connecting Printer To Both Usb And Wifi
01-13-201809:58 AM – edited 01-13-201809:58 AM
Anyone.. ?
can tell if & how this printer can be configured to use both USB an WiFi interfaces for printing?
The documentation is not clear about this.
I want to print wireless from all devices, except for my business laptop, that is on a VPN, and does not allow access to local IP ranges. For this laptop I want to print over USB.
Thank you for posting on HP Forums,
Flower_Bud is at your service.
As I understand, you’re in need of support.
No worries, as I’ll be glad to help you,
Follow these steps to connect your business laptop to the printer:
Step 1: Set up your HP printer for a USB cable connection to a Windows computer following steps from the article:
Step 2: Convert USB Connection to Wireless anytime: If you initially set up your printer with a USB cable connection to the computer using the full feature HP driver or the HP Smart app, you can convert to a wireless network connection at any time.
-
HP Printer Setup & Software utility: Search Windows for ‘HP’, and then click the name of your printer in the results to open HP Printer Assistant. Click Utilities or Tools in the top menu bar, click Printer Setup & Software or Device Setup & Software, and then click Convert a USB connected printer to wireless to launch the utility.
Figure: Convert a USB connected printer to wireless utility in HP Printer Assistant
You could follow steps from the video: .
Advantages Of A Wired Printer
There are few advantages of having a wired printer instead of a wireless printer. Although the wired printer is considered old technology, it is better as compared to wireless printers in many aspects.
- They do not need a Wi-Fi or Bluetooth connection to be connected with your device.
- There is no special cable for the installation of the printer with your laptop any good USB cable would do the task.
- They are easier to install as compared to a wireless printer.
- If a network distortion occurs, the working of a wireless printer is stopped instantly, whereas, in wired printers, it is not so.
- The data transfer process is much easier and faster in a wired printer. You can print your documents almost instantly with your wired printer instead of going into the long procedure of installation and then Wi-Fi connection and AirPrint.
By following these easy steps, you can get your Canon printer connected with your laptop in no time. Learn how to add a printer to ipad and iphone since that might come handy as well.
Also Check: Can I Connect My Phone To My Printer
***please Scroll Down For Mac Instructions***
Scan With The Hp Easy Scan App
Don’t Miss: How To Trick Printer Ink Cartridge Hp
Video Of Refreshing The Windows Device Manager
How To Connect A Printer Via Wired Usb Cable
Among your puzzle pieces should be a USB cable that connects directly into your computers tower or your laptops body. Depending on your computers operating system, your computer should notify you that a new connection is being made and that a driver will need to be downloaded for it to complete the installation.
If you get this notification, follow your computers intuitive lead and click the notification. It could do all the heavy lifting for you. If your computer has left you to do all the figuring out by yourself follow these steps.
Step 1: Open windows setting
- At the bottom left of your screen, click the Windows icon to reveal your Start Menu
- At the bottom of the left-most column, you should see a gear icon linking to your settings window
Step 2: Access devices
- Within the first row of your Windows settings, find and click the icon labeled Devices
- In the left column of the Devices window, select Printers & Scanners
- This new window brings up a page where the first option will be to Add Printer or Scanner
Step 3: Connect your printer
- Once youve clicked Add Printer or Scanner, Windows should be able to detect your printer connected via USB cable
- When the name of your printer pops up, click it and complete the installation as per your computers instruction
Thats it! Your printer should be connected and running, ready to churn out beautiful pages.
You May Like: How To Scan A Document With Canon Printer