How To Connect Brother Hl-l2360dw Printer To Wifi

How Do I Connect My Brother 2710 Printer To My Wifi

Brother Laser Printer Install Setup and Wifi HL L2300D HL L2320D HL L2340DW HL L2360DW [Tutorial]

To set up your Brother machine on a wireless network:

Connect the power cord to your Brother machine and then connect it to an electrical socket.

Press Menu button on the machines control panel.

Press the Up or Down arrow key to select Network and press OK.

Press the Up or Down arrow key to select WLAN and press OK.

How To Connect Brother Printer To Wifi Check This Simple Guide

Tripboba.com – Brother printer is one of the first-class printer brands which is broadly used by the billions of users everywhere throughout the world. Brother printer gives an astonishing printing facility for the users. Besides, it is likewise accessible and available in different ranges.

Brother printers can be effortlessly used for many printing purposes and it is very known for giving the top tier printing features. But, users occasionally go up against issues when they buy another Brother printer and search for the best way of how to connect brother printer to WiFi even it’s a very easy and simple procedure to perform.

In this article, you will find out about how to connect brother printer to WiFi. Check these highlights out!

Remedies To Fix The Issues

Remedy 1

Turn off your Brother Printer and turn it on again after a few minutes. This helps to re-establish the connection between your printer and PC.

Remedy 2

You can also use the Network Connection Repair tool to eradicate network connectivity issues. This helps in assigning the right network SSID as well as the Subnet Mask.

Remedy 3

Print the WLAN Report of your printer and verify the status of your printer. If your printer is not connected to the correct network or not connected at all, then you need to connect Brother Printer to wifi once again.

Don’t Miss: How To Fix Hp Printer Offline

S To Connect Brother Printer To Windows 10 Computer

Complete these steps in the same order as written below to connect Brother Printer to wifi on Windows 10:

From any web browser, go to

Choose brother printer model and choose the operating system.

Once done with that, go to the control panel of your printer.

Open the printer menu on your screen.

Navigate to the Network section and choose WLAN.

Select Setup wizard and hit the Enter key when you see the wireless icon on your display.

From the appeared results, choose your network.

Enter the correct password for the same wireless network.

Your printer will now be connected successfully.

Use these steps if you want to connect brother printer to laptop wirelessly.

What Is Advanced Method To Configure Brother Wireless Printer Setup

How To Connect Brother Printer To Wifi Hl L2360Dw : Solved ...

Following is one more solution for your query how do i connect my brother printer to my wireless network?

1st Fix Turn on your Printer and then select Menu
2nd Fix Press down arrow to select network> After that Press Ok.
3rd Fix Press WLAN> Press Ok > And then select setup wizard
4th Fix When WLAN enable display on the screen then choose on.
5th Fix Now the list of SSID will display on the screen.
6th Fix So now select your SSID name or Network name.
7th Fix If machine ask you use WPS then select 2 for No
8th Fix Now enter your Network Password and then enter OK.
9th Fix Now on screen WLAN apply setting will display select Yes and then press Ok.

Now machine will take few moments to connect your wireless network after that a message displayed connected or connection failed. If failed then your password was enter incorrect.

KEYFACTOR: ASSISTANCE AT DOOR STEP

Dont forget that the installation screen appears automatically. If prompted, choose your model and language.

Installation or fixing process vary system to system.

If your problem is not solved by you.

Then get an expert to help. We are just a click away.

So Call us on our number to get instant solution.

We believe in user satisfaction until you get a reliable solution.

We wont leave your problem in any situation.

Dont worry because we are here to guide you.

We make it sure that your issue is sorted out.

EXTRAS: Trying to Connect Brother Printer to Wireless Network

How To Set Up Brother Hl

One of the top-selling printing machines, Brother Printers are known for their innovative design and excellent print quality. The HL-L2360DW Brother Printer is a monochrome Printer model known for its reliability and affordability. Whether it is your home or office setup, you can use the Brother HL-L2360DW wireless setup for using various WiFi-enabled devices and print wirelessly. Read on to explore how to connect Brother HL-L2360DW to WiFi, do the wireless setup, and learn how to troubleshoot some of the commonly occurring Brother HL-L2360 Printer issues.

Brother HL-L2360DW Wireless Setup

Before you start with the Brother HL-L2360 wireless setup, take a note of the wireless network name and the network key . You will require this information later. To setup Brother HL-2360DW Wireless Printer, follow the steps mentioned below:

To get an answer to queries like how to connect Brother HL-L2360DW to Wifi or the setup, first, turn on your Brother Printer after connecting the power adapter to an electrical socket.

Select the Network option by pressing the Up or Down arrow key and then press OK.

Select the WLAN option by pressing the UP or Down arrow key and then press OK.

Use the Up or Down arrow key to select the Setup Wizard and press OK to continue with the Brother HL-L2360DW wireless setup.

Enable the wireless network by selecting Yes, when the question WLAN Enable? pops on the Printers control panel.

Select your SSID that you wrote down earlier and press OK.

How Do I Set Up My Brother Hl

Brother is a Japanese Multinational Electronics and electrical equipment company. It manufactures multiple products like printers, multifunctional printers, desktop computers, consumer and industrial sewing machines, and more. One of Brothers productions in printers is the Brother HL-L2360DW printer it is a reliable, affordable, monochrome printer perfect for home or small office use. You can connect your printer using wireless or wired networking or a Hi-Speed USB interface. The single-line LCD helps make the menu navigation much easier. The printer offers high printing speed for faster printing up to 2400 x 600 dpi, along with an adjustable 250-sheet capacity tray. The printer is compatible with mobile devices over the wireless network, which contributes to making the entire printing experience much easier. You will find the steps for Brother HL-L2360DW Wifi Setup in this blog.

Table of Content

You May Like: How Do I Find The Wps Pin For My Printer

Delete All Print Jobs

Right-click your Brother machine’s icon > See what’s printing> Printer> Cancel All Documents.

If Cancel All Documents is greyed out like above, click Open As Administrator. Enter a password for an administrator and click Yes.

When you have completed the checks in this section, try to print. If you still cannot print, check your wireless connection as described in section 2.

What After The Printers Wireless Setup

Wireless Setup using the control panel | HLL2360DW HLL2340DW HLL2315DW HLL2305W

Once you complete the brother hl l2360dw wifi setup, itâs time to install the printer software. If you didnât receive the printer driver CD along with your printer package, you need to download it from Brotherâs official website. If you are using Windows OS, visit the official website of Brother and go to the Downloads section. The next step requires you to download the Full Driver & Software Package. You can follow the on-screen installation instructions on the driver download page to install the driver on your computer.

Recommended Reading: How To Align Hp Printer

How Do I Setup My Brother Hl L2390dw Wireless Printer

How to Connect Brother HL-L2390DW Printer to Wifi

Power on your router and check if it provides an active internet.

Turn on your Brother HL-L2390DW printer by force pressing its power button.

On the function panel of the Brother HL-L2390DW setup printer, tap the Menu or Settings icon.

Pick Network and tap OK.

Connect Wireless Brother Printer To Mac Pc

For Brother Printer wireless setup on Mac, just follow the instructions as given below:

At first, install the Brother Printer driver from the support page.

Next, double-tap on the downloaded file.

Then, open the Utilities folder.

Choose Wireless Device Setup Wizard.

Then, double-click on the file named Wireless Device Setup Wizard.app.

Now, follow some easy instructions to complete the setup.

Choose the desired wireless network and enter its password.

Make sure you select the correct network SSID.

The wireless connection would now be established.

Don’t Miss: How Do I Get My Printer Online Hp

How To Print Envelopes On Brother Hl

Open the back cover of the Brother HL-L2360DW printer.
Gently pull two green-colored levers to both the sides.
Open the door of the manual feed slot.
Slide the guides of the manual feed slot and load your envelope for printing.
Open the printer software on your computer.
Set the print configurations for printing the envelope.
Send the data to be printed on the envelope to your printer.
After printing the envelope, fix the levers to its position.
Close the access cover at the back of the Brother HL-L2360DW setup.

Make Sure Your Computer Is Connected To The Wireless Network

To test the connection, you can try the following:

Visit an Internet site or send and receive emails. If you can access the Internet, but your Brother machine cannot be found over the network, go to 2.2.

Print the WLAN report, which will show you the status of your connection. If there are any error codes on the report, .

Don’t Miss: How Do I Connect My Wireless Printer To My Phone

Print The Network Configuration Report And Check The Connection To The Wireless Router Or Access Point

When your Brother machine is connected to the wireless network, check the machine’s wireless connection status by printing the Network Configuration Report:

Check the IP address next to < IP Settings> on the printed report.

Compare your computer’s and the Brother machine’s IP address.

Make sure the addresses are the same and only the end numbers are different.For example:Computer: 192.168.1.2Brother Machine: 192.168.1.110

Make sure your computer and the Brother machine use different end numbers between 2 and 254.

Each machine or computer on your network must have a unique IP address.

If the IP Address on the Network Configuration Report shows 0.0.0.0, wait for at least five minutes and try to connect again.

Next, ping your Brother machine to check if it is communicating correctly with your computer.

3.2.2 Ping the Brother machine

While still in the Command Prompt window, type: ping xxx.xxx.xxx.xxx.

Press the Enter key on your keyboard. The computer will ping or try to communicate with the Brother machine. When completed, you will receive the ping statistics.

If you receive replies and they are from the Brother machine’s IP address , then there is communication between the computer and the Brother machine. Close the window.

If you do not receive any replies or they are not from the correct IP address, there is a communication problem between the Brother machine and the computer. To resolve the issue, follow the steps below:

Repeat 3.2.2 after changing any settings.

For Windows Mac Android And Iphone:

For Windows: the installation screen will appear on your computer. Choose your printer model and language to connect the Brother HL12360DW printer to Wi-Fi. Select install printer driver, and click YES to accept the license agreement. Click Allow on the User Account Control Screen. Now, follow the instructions displayed on-screen to complete the driver setup. Wait until the driver installation completes and try printing in your Epson printer to ensure proper connectivity and installation of drivers to note the Brother HL L2360DW wireless setup.

For Mac: Double-click the brother printer icon on the desktop. Now, click the Start Here OSX twice to install. Select your printer model, and the download screen will appear when you select the Start Here OSX icon. Now you need t double-click on the downloaded file to start the driver installation. Follow the instructions carefully displayed on-screen to complete the installation ofhowto set up brother HL L2360DW wirelessconnection network.

For Android: Tap the settings icon or swipe down and tap the Cog icon to access the settings menu. Now tap Connections and then Wi-Fi. If your Wi-Fi is turned off, then turn it on and then find the network name you wrote down earlier, and now tap Connect. The wireless connection setup is complete if Connected appears under the Network name you selected. Download the Brother Iprint& Scan for Android devices for free from Google Play.

Don’t Miss: How To Turn Printer Online Windows 10

Where Do You Find The Wps Pin On Your Brother Printer

Find WPS PIN on touchscreen models of Brother Printer

Begin by turning on your Brother machine by connecting it to the power cord.

After this, press the Menu option and then press Network.

Further, you have to click on the WLAN option.

Now, use the up and down arrow keys to display WPS w/PIN Code.

Before You Set Up Your Brother Machine

Brother Printer Wireless Setup with 2 Methods (Easy or Painful)

You must find out the wireless network settings of your wireless router or access point. Check and write down the current wireless network settings below :

Network Name
Network Key

How to find the Network Name and Network Key

Check the base or side of your wireless router or access point.

See the documentation provided with your wireless router or access point.

Brother cannot provide this information. If you cannot find your wireless Network Name and Network Key, contact your Internet service provider or router manufacturer.

If you cannot find the Network Name and Network Key of your wireless router or access point, see the following FAQs:

After checking the network information of your wireless router or access point, go to step 2 to set up your machine on a wireless network.

If your wireless router or access point uses WEP encryption with multiple WEP keys, write down and use only the first WEP key.

Don’t Miss: Connecting Printer To Windows 10

Set Up A Brother Machine On A Wireless Network

When you have located the wireless network settings of your wireless router or access point, set up your Brother machine as shown in the video below or described in the section under the video.

*The video clip is being streamed from YouTube.

How to use the buttons:

Start the video

Stop the video

Restart the video

The product or components shown in this video may differ from the ones that you are using.
Video content may change without prior notice.
You can change the size of the captions that are shown in the YouTube video by clicking

Connect the power cord to your Brother machine and then connect it to an electrical socket. Turn your Brother machine on.

Press the Up or Down arrow key to select the Network option and press OK.

Press the Up or Down arrow key to select the WLAN option and press OK.

Press the Up or Down arrow key to select the Setup Wizard and press OK.

When the question WLAN Enable? appears, select Yes to enable the wireless network. This will start the wireless setup wizard.

The machine will search for your network and display a list of available Network Names . When a list of SSIDs appears, press the Up or Down arrow keys to select the SSID you wrote down earlier, and then press OK.

Do one of the following:

If using an authentication and encryption method that requires the Network Key Enter the Network Key, then press OK to apply your settings. Select Yes to apply the settings.

You May Like: Define Collated Printing

Brother Hll2360dw Compact Laser Printer With

Can you guesstimate how old your brother is? Choose a mobile device you want to connect to and press ok.

Brother hll2360dw compact laser printer with. 1) place the printer close to the router connection 2) use the up and down arrow key to choose network

Brother hll2360dw printer driver laser printer printer. A wireless computer or ethernet cable is needed temporarily.

Buying a printer how to choose the best printer for home. And just to clarify, whats the exact model?

How to download safari technology preview on mac macbook. By connecting to wireless network manually on your printer.

Okidata oki printing solution drums printer. Configure the machines wireless settings using a web browser.

Pin on brother printer not working printing connecting. Connect printer to a computer with a usb cable and a network using the wireless connection or an ethernet cable.

Pin on home office. Connect the ethernet network cable to the label printer and active lan port on the network .

Wireless setup using the control panel hll2360dw. Connect the power cord to your brother machine and then connect it to an ac power outlet .

Panosundaki pin. Connect the power cord to your brother machine and then connect it to an electrical socket.

How To Connect Brother Hl-l2360dw Printer To Wifi

Don't Miss

How Do I Connect My Brother 2710 Printer To My Wifi

How To Connect Brother Printer To Wifi Check This Simple Guide

Remedies To Fix The Issues

S To Connect Brother Printer To Windows 10 Computer

What Is Advanced Method To Configure Brother Wireless Printer Setup

KEYFACTOR: ASSISTANCE AT DOOR STEP

EXTRAS: Trying to Connect Brother Printer to Wireless Network

Related Searches:

How To Set Up Brother Hl

How Do I Set Up My Brother Hl

Delete All Print Jobs

What After The Printers Wireless Setup

How Do I Setup My Brother Hl L2390dw Wireless Printer

Connect Wireless Brother Printer To Mac Pc

How To Print Envelopes On Brother Hl

Make Sure Your Computer Is Connected To The Wireless Network

Print The Network Configuration Report And Check The Connection To The Wireless Router Or Access Point

3.2.2 Ping the Brother machine

For Windows Mac Android And Iphone:

Where Do You Find The Wps Pin On Your Brother Printer

Before You Set Up Your Brother Machine

Related Questions And Answers

What is the network key for Brother Printer?

How to connect brother printer to iPhone?

Why is the WiFi button flashing on my Brother printer?

How to connect brother printer to google cloud print?

Set Up A Brother Machine On A Wireless Network

Brother Hll2360dw Compact Laser Printer With

More articles

Popular Articles

About Us

Popular Category

Editor Picks